QuantumCircuit

class QuantumCircuit(*regs, name=None, global_phase=0, metadata=None)

GitHub

Bases: object

Create a new circuit.

A circuit is a list of instructions bound to some registers.

Parameters

regs (list(Register) or list(int) or list(list(Bit))) –

The registers to be included in the circuit.
- If a list of Register objects, represents the QuantumRegister and/or ClassicalRegister objects to include in the circuit.
  
  For example:
  - QuantumCircuit(QuantumRegister(4))
  - QuantumCircuit(QuantumRegister(4), ClassicalRegister(3))
  - QuantumCircuit(QuantumRegister(4, 'qr0'), QuantumRegister(2, 'qr1'))
- If a list of int, the amount of qubits and/or classical bits to include in the circuit. It can either be a single int for just the number of quantum bits, or 2 ints for the number of quantum bits and classical bits, respectively.
  
  For example:
  - QuantumCircuit(4) # A QuantumCircuit with 4 qubits
  - QuantumCircuit(4, 3) # A QuantumCircuit with 4 qubits and 3 classical bits
- $If a list of python lists containing Bit objects, a collection of Bit s to be added to the circuit.$
$name (str) - the name of the quantum circuit. If not set, an automatically generated string will be assigned.$
$global_phase (float or ParameterExpression) - The global phase of the circuit in radians.$
$metadata (dict) - Arbitrary key value metadata to associate with the circuit. This gets stored as free-form data in a dict in the metadata attribute. It will not be directly used in the circuit.$

Raises

CircuitError - if the circuit name, if given, is not valid.

Examples

Construct a simple Bell state circuit.

from qiskit import QuantumCircuit
 
qc = QuantumCircuit(2, 2)
qc.h(0)
qc.cx(0, 1)
qc.measure([0, 1], [0, 1])
qc.draw()

     ┌───┐     ┌─┐   
q_0: ┤ H ├──■──┤M├───
     └───┘┌─┴─┐└╥┘┌─┐
q_1: ─────┤ X ├─╫─┤M├
          └───┘ ║ └╥┘
c: 2/═══════════╩══╩═
                0  1

Construct a 5-qubit GHZ circuit.

from qiskit import QuantumCircuit
 
qc = QuantumCircuit(5)
qc.h(0)
qc.cx(0, range(1, 5))
qc.measure_all()

Construct a 4-qubit Bernstein-Vazirani circuit using registers.

from qiskit import QuantumRegister, ClassicalRegister, QuantumCircuit
 
qr = QuantumRegister(3, 'q')
anc = QuantumRegister(1, 'ancilla')
cr = ClassicalRegister(3, 'c')
qc = QuantumCircuit(qr, anc, cr)
 
qc.x(anc[0])
qc.h(anc[0])
qc.h(qr[0:3])
qc.cx(qr[0:3], anc[0])
qc.h(qr[0:3])
qc.barrier(qr)
qc.measure(qr, cr)
 
qc.draw()

         ┌───┐          ┌───┐           ░ ┌─┐      
    q_0: ┤ H ├───────■──┤ H ├───────────░─┤M├──────
         ├───┤       │  └───┘┌───┐      ░ └╥┘┌─┐   
    q_1: ┤ H ├───────┼────■──┤ H ├──────░──╫─┤M├───
         ├───┤       │    │  └───┘┌───┐ ░  ║ └╥┘┌─┐
    q_2: ┤ H ├───────┼────┼────■──┤ H ├─░──╫──╫─┤M├
         ├───┤┌───┐┌─┴─┐┌─┴─┐┌─┴─┐└───┘ ░  ║  ║ └╥┘
ancilla: ┤ X ├┤ H ├┤ X ├┤ X ├┤ X ├─────────╫──╫──╫─
         └───┘└───┘└───┘└───┘└───┘         ║  ║  ║ 
    c: 3/══════════════════════════════════╩══╩══╩═
                                           0  1  2

Methods

add_bits

QuantumCircuit.add_bits(bits)

Add Bits to the circuit.

Return type

None

add_calibration

QuantumCircuit.add_calibration(gate, qubits, schedule, params=None)

Register a low-level, custom pulse definition for the given gate.

Parameters

gate (Union[Gate, str]) – Gate information.
qubits (Union[int, Tuple[int]]) – List of qubits to be measured.
schedule (Schedule) – Schedule information.
params (Optional[List[Union[float, Parameter]]]) – A list of parameters.

Raises

Exception - if the gate is of type string and params is None.

Return type

None

add_register

QuantumCircuit.add_register(*regs)

Add registers.

Return type

None

append

QuantumCircuit.append(instruction, qargs=None, cargs=None)

Append one or more instructions to the end of the circuit, modifying the circuit in place. Expands qargs and cargs.

Parameters

instruction (qiskit.circuit.Instruction) – Instruction instance to append
qargs (list(argument)) – qubits to attach instruction to
cargs (list(argument)) – clbits to attach instruction to

Returns

a handle to the instruction that was just added

Return type

qiskit.circuit.Instruction

Raises

CircuitError – if object passed is a subclass of Instruction
CircuitError – if object passed is neither subclass nor an instance of Instruction

assign_parameters

QuantumCircuit.assign_parameters(parameters, inplace=False)

Assign parameters to new parameters or values.

The keys of the parameter dictionary must be Parameter instances in the current circuit. The values of the dictionary can either be numeric values or new parameter objects. The values can be assigned to the current circuit object or to a copy of it.

Parameters

parameters (dict or iterable) – Either a dictionary or iterable specifying the new parameter values. If a dict, it specifies the mapping from current_parameter to new_parameter, where new_parameter can be a new parameter object or a numeric value. If an iterable, the elements are assigned to the existing parameters in the order of QuantumCircuit.parameters.
inplace (bool) – If False, a copy of the circuit with the bound parameters is returned. If True the circuit instance itself is modified.

Raises

CircuitError – If parameters is a dict and contains parameters not present in the circuit.
ValueError – If parameters is a list/array and the length mismatches the number of free parameters in the circuit.

Returns

A copy of the circuit with bound parameters, if inplace is False, otherwise None.

Return type

Optional(QuantumCircuit)

Examples

Create a parameterized circuit and assign the parameters in-place.

from qiskit.circuit import QuantumCircuit, Parameter
 
circuit = QuantumCircuit(2)
params = [Parameter('A'), Parameter('B'), Parameter('C')]
circuit.ry(params[0], 0)
circuit.crx(params[1], 0, 1)
 
print('Original circuit:')
print(circuit.draw())
 
circuit.assign_parameters({params[0]: params[2]}, inplace=True)
 
print('Assigned in-place:')
print(circuit.draw())

Original circuit:

     ┌───────┐         
q_0: ┤ Ry(A) ├────■────
     └───────┘┌───┴───┐
q_1: ─────────┤ Rx(B) ├
              └───────┘
Assigned in-place:
     ┌───────┐         
q_0: ┤ Ry(C) ├────■────
     └───────┘┌───┴───┐
q_1: ─────────┤ Rx(B) ├
              └───────┘

Bind the values out-of-place and get a copy of the original circuit.

from qiskit.circuit import QuantumCircuit, ParameterVector
 
circuit = QuantumCircuit(2)
params = ParameterVector('P', 2)
circuit.ry(params[0], 0)
circuit.crx(params[1], 0, 1)
 
bound_circuit = circuit.assign_parameters({params[0]: 1, params[1]: 2})
print('Bound circuit:')
print(bound_circuit.draw())
 
print('The original circuit is unchanged:')
print(circuit.draw())

Bound circuit:
     ┌───────┐         
q_0: ┤ Ry(1) ├────■────
     └───────┘┌───┴───┐
q_1: ─────────┤ Rx(2) ├
              └───────┘
The original circuit is unchanged:
     ┌──────────┐            
q_0: ┤ Ry(P[0]) ├─────■──────
     └──────────┘┌────┴─────┐
q_1: ────────────┤ Rx(P[1]) ├
                 └──────────┘

barrier

QuantumCircuit.barrier(*qargs)

Apply Barrier . If qargs is empty, applies to all qubits in the circuit.

Returns

handle to the added instructions.

Return type

qiskit.circuit.InstructionSet

bind_parameters

QuantumCircuit.bind_parameters(values)

Assign numeric parameters to values yielding a new circuit.

To assign new Parameter objects or bind the values in-place, without yielding a new circuit, use the assign_parameters() method.

Parameters

values (dict or iterable) - {parameter: value, \dots} or [value1, value2, \dots]

Raises

CircuitError – If values is a dict and contains parameters not present in the circuit.
TypeError – If values contains a ParameterExpression.

Returns

copy of self with assignment substitution.

Return type

QuantumCircuit

break_loop

QuantumCircuit.break_loop()

Apply BreakLoopOp .

Warning

If you are using the context-manager “builder” forms of if_test(), for_loop() or while_loop(), you can only call this method if you are within a loop context, because otherwise the “resource width” of the operation cannot be determined. This would quickly lead to invalid circuits, and so if you are trying to construct a reusable loop body (without the context managers), you must also use the non-context-manager form of if_test() and if_else() . Take care that the BreakLoopOp instruction must span all the resources of its containing loop, not just the immediate scope.

Return type

InstructionSet

Returns

A handle to the instruction created.

Raises

CircuitError - if this method was called within a builder context, but not contained within a loop.

cast

static QuantumCircuit.cast(value, type_)

Best effort to cast value to type. Otherwise, returns the value.

Return type

Union [~S, ~T]

cbit_argument_conversion

QuantumCircuit.cbit_argument_conversion(clbit_representation)

Converts several classical bit representations (such as indexes, range, etc.) into a list of classical bits.

Parameters

clbit_representation (Object) - representation to expand

Returns

Where each tuple is a classical bit.

Return type

List(tuple)

ccx

QuantumCircuit.ccx(control_qubit1, control_qubit2, target_qubit, ctrl_state=None)

Apply CCXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the first control.
control_qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the second control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

ch

QuantumCircuit.ch(control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CHGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

cls_instances

classmethod QuantumCircuit.cls_instances()

Return the current number of instances of this class, useful for auto naming.

Return type

int

cls_prefix

classmethod QuantumCircuit.cls_prefix()

Return the prefix to use for auto naming.

Return type

str

cnot

QuantumCircuit.cnot(control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

See also

QuantumCircuit.cx: the same function with a different name.

combine

QuantumCircuit.combine(rhs)

DEPRECATED - Returns rhs appended to self if self contains compatible registers.

Two circuits are compatible if they contain the same registers or if they contain different registers with unique names. The returned circuit will contain all unique registers between both circuits.

Return self + rhs as a new object.

Parameters

rhs (QuantumCircuit) - The quantum circuit to append to the right hand side.

Returns

Returns a new QuantumCircuit object

Return type

QuantumCircuit

Raises

QiskitError - if the rhs circuit is not compatible

compose

QuantumCircuit.compose(other, qubits=None, clbits=None, front=False, inplace=False, wrap=False)

Compose circuit with other circuit or instruction, optionally permuting wires.

other can be narrower or of equal width to self .

Parameters

other (qiskit.circuit.Instruction orQuantumCircuit) – (sub)circuit or instruction to compose onto self. If not a QuantumCircuit, this can be anything that append will accept.
qubits (list[Qubit|int]) – qubits of self to compose onto.
clbits (list[Clbit|int]) – clbits of self to compose onto.
front (bool) – If True, front composition will be performed (not implemented yet).
inplace (bool) – If True, modify the object. Otherwise return composed circuit.
wrap (bool) – If True, wraps the other circuit into a gate (or instruction, depending on whether it contains only unitary instructions) before composing it onto self.

Returns

the composed circuit (returns None if inplace==True).

Return type

QuantumCircuit

Raises

CircuitError – if composing on the front.
QiskitError – if other is wider or there are duplicate edge mappings.

Examples:

lhs.compose(rhs, qubits=[3, 2], inplace=True)
 
.. parsed-literal::
 
                ┌───┐                   ┌─────┐                ┌───┐
    lqr_1_0: ───┤ H ├───    rqr_0: ──■──┤ Tdg ├    lqr_1_0: ───┤ H ├───────────────
                ├───┤              ┌─┴─┐└─────┘                ├───┤
    lqr_1_1: ───┤ X ├───    rqr_1: ┤ X ├───────    lqr_1_1: ───┤ X ├───────────────
             ┌──┴───┴──┐           └───┘                    ┌──┴───┴──┐┌───┐
    lqr_1_2: ┤ U1(0.1) ├  +                     =  lqr_1_2: ┤ U1(0.1) ├┤ X ├───────
             └─────────┘                                    └─────────┘└─┬─┘┌─────┐
    lqr_2_0: ─────■─────                           lqr_2_0: ─────■───────■──┤ Tdg ├
                ┌─┴─┐                                          ┌─┴─┐        └─────┘
    lqr_2_1: ───┤ X ├───                           lqr_2_1: ───┤ X ├───────────────
                └───┘                                          └───┘
    lcr_0: 0 ═══════════                           lcr_0: 0 ═══════════════════════
 
    lcr_1: 0 ═══════════                           lcr_1: 0 ═══════════════════════

continue_loop

QuantumCircuit.continue_loop()

Apply ContinueLoopOp .

Warning

If you are using the context-manager “builder” forms of if_test(), for_loop() or while_loop(), you can only call this method if you are within a loop context, because otherwise the “resource width” of the operation cannot be determined. This would quickly lead to invalid circuits, and so if you are trying to construct a reusable loop body (without the context managers), you must also use the non-context-manager form of if_test() and if_else() . Take care that the ContinueLoopOp instruction must span all the resources of its containing loop, not just the immediate scope.

Return type

InstructionSet

Returns

A handle to the instruction created.

Raises

CircuitError - if this method was called within a builder context, but not contained within a loop.

control

QuantumCircuit.control(num_ctrl_qubits=1, label=None, ctrl_state=None)

Control this circuit on num_ctrl_qubits qubits.

Parameters

num_ctrl_qubits (int) – The number of control qubits.
label (str) – An optional label to give the controlled operation for visualization.
ctrl_state (str or int) – The control state in decimal or as a bitstring (e.g. ‘111’). If None, use 2**num_ctrl_qubits - 1.

Returns

The controlled version of this circuit.

Return type

QuantumCircuit

Raises

CircuitError - If the circuit contains a non-unitary operation and cannot be controlled.

copy

QuantumCircuit.copy(name=None)

Copy the circuit.

Parameters

name (str) - name to be given to the copied circuit. If None, then the name stays the same

Returns

a deepcopy of the current circuit, with the specified name

Return type

QuantumCircuit

count_ops

QuantumCircuit.count_ops()

Count each operation kind in the circuit.

Returns

a breakdown of how many operations of each kind, sorted by amount.

Return type

OrderedDict

cp

QuantumCircuit.cp(theta, control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CPhaseGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The angle of the rotation.
control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

crx

QuantumCircuit.crx(theta, control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CRXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The angle of the rotation.
control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

cry

QuantumCircuit.cry(theta, control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CRYGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The angle of the rotation.
control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

crz

QuantumCircuit.crz(theta, control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CRZGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The angle of the rotation.
control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

cswap

QuantumCircuit.cswap(control_qubit, target_qubit1, target_qubit2, label=None, ctrl_state=None)

Apply CSwapGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
target_qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

csx

QuantumCircuit.csx(control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CSXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

cu

QuantumCircuit.cu(theta, phi, lam, gamma, control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CUGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The $\theta$ rotation angle of the gate.
phi (Union[ParameterExpression, float]) – The $\phi$ rotation angle of the gate.
lam (Union[ParameterExpression, float]) – The $\lambda$ rotation angle of the gate.
gamma (Union[ParameterExpression, float]) – The global phase applied of the U gate, if applied.
control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

cu1

QuantumCircuit.cu1(theta, control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CU1Gate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The $\theta$ rotation angle of the gate.
control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

cu3

QuantumCircuit.cu3(theta, phi, lam, control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CU3Gate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The $\theta$ rotation angle of the gate.
phi (Union[ParameterExpression, float]) – The $\phi$ rotation angle of the gate.
lam (Union[ParameterExpression, float]) – The $\lambda$ rotation angle of the gate.
control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

cx

QuantumCircuit.cx(control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

cy

QuantumCircuit.cy(control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CYGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the controls.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

cz

QuantumCircuit.cz(control_qubit, target_qubit, label=None, ctrl_state=None)

Apply CZGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the controls.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
label (Optional[str]) – The string label of the gate in the circuit.
ctrl_state (Union[int, str, None]) – The control state in decimal, or as a bitstring (e.g. ‘1’). Defaults to controlling on the ‘1’ state.

Return type

InstructionSet

Returns

A handle to the instructions created.

dcx

QuantumCircuit.dcx(qubit1, qubit2)

Apply DCXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.
qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

decompose

QuantumCircuit.decompose(gates_to_decompose=None)

Call a decomposition pass on this circuit, to decompose one level (shallow decompose).

Parameters

gates_to_decompose (str or list(str)) - optional subset of gates to decompose. Defaults to all gates in circuit.

Returns

a circuit one level decomposed

Return type

QuantumCircuit

delay

QuantumCircuit.delay(duration, qarg=None, unit='dt')

Apply Delay . If qarg is None, applies to all qubits. When applying to multiple qubits, delays with the same duration will be created.

Parameters

duration (int or float or ParameterExpression) – duration of the delay.
qarg (Object) – qubit argument to apply this delay.
unit (str) – unit of the duration. Supported units: ‘s’, ‘ms’, ‘us’, ‘ns’, ‘ps’, ‘dt’. Default is dt, i.e. integer time unit depending on the target backend.

Returns

handle to the added instructions.

Return type

qiskit.circuit.InstructionSet

Raises

CircuitError - if arguments have bad format.

depth

QuantumCircuit.depth(filter_function=<function QuantumCircuit.<lambda>>)

Return circuit depth (i.e., length of critical path).

Parameters

filter_function (callable) - a function to filter out some instructions. Should take as input a tuple of (Instruction, list(Qubit), list(Clbit)). By default filters out “directives”, such as barrier or snapshot.

Returns

Depth of circuit.

Return type

int

Notes

The circuit depth and the DAG depth need not be the same.

diagonal

QuantumCircuit.diagonal(diag, qubit)

Attach a diagonal gate to a circuit.

The decomposition is based on Theorem 7 given in “Synthesis of Quantum Logic Circuits” by Shende et al. (https://arxiv.org/pdf/quant-ph/0406176.pdf).

Parameters

diag (list) – list of the 2^k diagonal entries (for a diagonal gate on k qubits). Must contain at least two entries
qubit (QuantumRegister|list) – list of k qubits the diagonal is acting on (the order of the qubits specifies the computational basis in which the diagonal gate is provided: the first element in diag acts on the state where all the qubits in q are in the state 0, the second entry acts on the state where all the qubits q[1],…,q[k-1] are in the state zero and q[0] is in the state 1, and so on)

Returns

the diagonal gate which was attached to the circuit.

Return type

QuantumCircuit

Raises

QiskitError - if the list of the diagonal entries or the qubit list is in bad format; if the number of diagonal entries is not 2^k, where k denotes the number of qubits

draw

QuantumCircuit.draw(output=None, scale=None, filename=None, style=None, interactive=False, plot_barriers=True, reverse_bits=False, justify=None, vertical_compression='medium', idle_wires=True, with_layout=True, fold=None, ax=None, initial_state=False, cregbundle=True)

Draw the quantum circuit. Use the output parameter to choose the drawing format:

text : ASCII art TextDrawing that can be printed in the console.

matplotlib : images with color rendered purely in Python.

latex : high-quality images compiled via latex.

latex_source : raw uncompiled latex output.

Parameters

output (str) – select the output method to use for drawing the circuit. Valid choices are text, mpl, latex, latex_source. By default the text drawer is used unless the user config file (usually ~/.qiskit/settings.conf) has an alternative backend set as the default. For example, circuit_drawer = latex. If the output kwarg is set, that backend will always be used over the default in the user config file.
scale (float) – scale of image to draw (shrink if < 1.0). Only used by the mpl, latex and latex_source outputs. Defaults to 1.0.
filename (str) – file path to save image to. Defaults to None.
style (dict or str) – dictionary of style or file name of style json file. This option is only used by the mpl or latex output type. If style is a str, it is used as the path to a json file which contains a style dict. The file will be opened, parsed, and then any style elements in the dict will replace the default values in the input dict. A file to be loaded must end in .json, but the name entered here can omit .json. For example, style='iqx.json' or style='iqx'. If style is a dict and the 'name' key is set, that name will be used to load a json file, followed by loading the other items in the style dict. For example, style={'name': 'iqx'}. If style is not a str and name is not a key in the style dict, then the default value from the user config file (usually ~/.qiskit/settings.conf) will be used, for example, circuit_mpl_style = iqx. If none of these are set, the default style will be used. The search path for style json files can be specified in the user config, for example, circuit_mpl_style_path = /home/user/styles:/home/user. See: DefaultStyle for more information on the contents.
interactive (bool) – when set to true, show the circuit in a new window (for mpl this depends on the matplotlib backend being used supporting this). Note when used with either the text or the latex_source output type this has no effect and will be silently ignored. Defaults to False.
reverse_bits (bool) – when set to True, reverse the bit order inside registers for the output visualization. Defaults to False.
plot_barriers (bool) – enable/disable drawing barriers in the output circuit. Defaults to True.
justify (string) – options are left, right or none. If anything else is supplied, it defaults to left justified. It refers to where gates should be placed in the output circuit if there is an option. none results in each gate being placed in its own column.
vertical_compression (string) – high, medium or low. It merges the lines generated by the text output so the drawing will take less vertical room. Default is medium. Only used by the text output, will be silently ignored otherwise.
idle_wires (bool) – include idle wires (wires with no circuit elements) in output visualization. Default is True.
with_layout (bool) – include layout information, with labels on the physical layout. Default is True.
fold (int) – sets pagination. It can be disabled using -1. In text, sets the length of the lines. This is useful when the drawing does not fit in the console. If None (default), it will try to guess the console width using shutil.get_terminal_size(). However, if running in jupyter, the default line length is set to 80 characters. In mpl, it is the number of (visual) layers before folding. Default is 25.
ax (matplotlib.axes.Axes) – Only used by the mpl backend. An optional Axes object to be used for the visualization output. If none is specified, a new matplotlib Figure will be created and used. Additionally, if specified there will be no returned Figure since it is redundant.
initial_state (bool) – optional. Adds |0> in the beginning of the wire. Default is False.
cregbundle (bool) – optional. If set True, bundle classical registers. Default is True.

Returns

TextDrawing or matplotlib.figure or PIL.Image or str :

$TextDrawing (output=’text’)$ $A drawing that can be printed as ascii art.$
$matplotlib.figure.Figure (output=’mpl’)$ $A matplotlib figure object for the circuit diagram.$
$PIL.Image (output=’latex’)$ $An in-memory representation of the image of the circuit diagram.$
$str (output=’latex_source’)$ $The LaTeX source code for visualizing the circuit diagram.$

Raises

VisualizationError – when an invalid output method is selected
ImportError – when the output methods requires non-installed libraries.

Example

from qiskit import QuantumRegister, ClassicalRegister, QuantumCircuit
from qiskit.tools.visualization import circuit_drawer
q = QuantumRegister(1)
c = ClassicalRegister(1)
qc = QuantumCircuit(q, c)
qc.h(q)
qc.measure(q, c)
qc.draw(output='mpl', style={'backgroundcolor': '#EEEEEE'})

../_images/qiskit.circuit.QuantumCircuit.draw_0_0.png

ecr

QuantumCircuit.ecr(qubit1, qubit2)

Apply ECRGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubits to apply the gate to.
qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubits to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

extend

QuantumCircuit.extend(rhs)

DEPRECATED - Append QuantumCircuit to the RHS if it contains compatible registers.

Two circuits are compatible if they contain the same registers or if they contain different registers with unique names. The returned circuit will contain all unique registers between both circuits.

Modify and return self.

Parameters

rhs (QuantumCircuit) - The quantum circuit to append to the right hand side.

Returns

Returns this QuantumCircuit object (which has been modified)

Return type

QuantumCircuit

Raises

QiskitError - if the rhs circuit is not compatible

find_bit

QuantumCircuit.find_bit(bit)

Find locations in the circuit which can be used to reference a given Bit .

Parameters

bit (Bit) - The bit to locate.

Returns

A 2-tuple. The first element (index)

contains the index at which the Bit can be found (in either qubits, clbits, depending on its type). The second element (registers) is a list of (register, index) pairs with an entry for each Register in the circuit which contains the Bit (and the index in the Register at which it can be found).

Return type

namedtuple(int, List[Tuple(Register, int)])

Notes

The circuit index of an AncillaQubit will be its index in qubits, not ancillas .

Raises

CircuitError – If the supplied Bit was of an unknown type.
CircuitError – If the supplied Bit could not be found on the circuit.

for_loop

QuantumCircuit.for_loop(indexset: Iterable[int], loop_parameter: Optional[qiskit.circuit.parameter.Parameter], body: None, qubits: None, clbits: None, *, label: Optional[str]) \to qiskit.circuit.controlflow.for_loop.ForLoopContext

QuantumCircuit.for_loop(indexset: Iterable[int], loop_parameter: Optional[qiskit.circuit.parameter.Parameter], body: QuantumCircuit, qubits: Sequence[Union[qiskit.circuit.quantumregister.Qubit, qiskit.circuit.quantumregister.QuantumRegister, int, slice, Sequence[Union[qiskit.circuit.quantumregister.Qubit, int]]]], clbits: Sequence[Union[qiskit.circuit.classicalregister.Clbit, qiskit.circuit.classicalregister.ClassicalRegister, int, slice, Sequence[Union[qiskit.circuit.classicalregister.Clbit, int]]]], *, label: Optional[str]) \to qiskit.circuit.instructionset.InstructionSet

Create a for loop on this circuit.

There are two forms for calling this function. If called with all its arguments (with the possible exception of label), it will create a ForLoopOp with the given body . If body (and qubits and clbits) are not passed, then this acts as a context manager, which, when entered, provides a loop variable (unless one is given, in which case it will be reused) and will automatically build a ForLoopOp when the scope finishes. In this form, you do not need to keep track of the qubits or clbits you are using, because the scope will handle it for you.

For example:

from qiskit import QuantumCircuit
qc = QuantumCircuit(2, 1)
 
with qc.for_loop(range(5)) as i:
    qc.h(0)
    qc.cx(0, 1)
    qc.measure(0, 0)
    qc.break_loop().c_if(0, True)

Parameters

$indexset (Iterable[int]) - A collection of integers to loop over. Always necessary.$
$loop_parameter (Optional[Parameter]) -$ $The parameter used within body to which the values from indexset will be assigned. In the context-manager form, if this argument is not supplied, then a loop parameter will be allocated for you and returned as the value of the with statement. This will only be bound into the circuit if it is used within the body.$ $If this argument is None in the manual form of this method, body will be repeated once for each of the items in indexset but their values will be ignored.$
$body (Optional[QuantumCircuit]) - The loop body to be repeatedly executed. Omit this to use the context-manager mode.$
$qubits (Optional[Sequence[QubitSpecifier]]) - The circuit qubits over which the loop body should be run. Omit this to use the context-manager mode.$
$clbits (Optional[Sequence[ClbitSpecifier]]) - The circuit clbits over which the loop body should be run. Omit this to use the context-manager mode.$
$label (Optional[str]) - The string label of the instruction in the circuit.$

Returns

depending on the call signature, either a context manager for creating the for loop (it will automatically be added to the circuit at the end of the block), or an InstructionSet handle to the appended loop operation.

Return type

InstructionSet or ForLoopContext

Raises

CircuitError - if an incorrect calling convention is used.

fredkin

QuantumCircuit.fredkin(control_qubit, target_qubit1, target_qubit2)

Apply CSwapGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the control.
target_qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
target_qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.

Return type

InstructionSet

Returns

A handle to the instructions created.

See also

QuantumCircuit.cswap: the same function with a different name.

from_qasm_file

static QuantumCircuit.from_qasm_file(path)

Take in a QASM file and generate a QuantumCircuit object.

Parameters

path (str) - Path to the file for a QASM program

Returns

The QuantumCircuit object for the input QASM

Return type

QuantumCircuit

from_qasm_str

static QuantumCircuit.from_qasm_str(qasm_str)

Take in a QASM string and generate a QuantumCircuit object.

Parameters

qasm_str (str) - A QASM program string

Returns

The QuantumCircuit object for the input QASM

Return type

QuantumCircuit

get_instructions

QuantumCircuit.get_instructions(name)

Get instructions matching name.

Parameters

name (str) - The name of instruction to.

Returns

list of (instruction, qargs, cargs).

Return type

list(tuple)

h

QuantumCircuit.h(qubit)

Apply HGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

hamiltonian

QuantumCircuit.hamiltonian(operator, time, qubits, label=None)

Apply hamiltonian evolution to qubits.

has_register

QuantumCircuit.has_register(register)

Test if this circuit has the register r.

Parameters

register (Register) - a quantum or classical register.

Returns

True if the register is contained in this circuit.

Return type

bool

i

QuantumCircuit.i(qubit)

Apply IGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

id

QuantumCircuit.id(qubit)

Apply IGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

See also

QuantumCircuit.i: the same function.

if_else

QuantumCircuit.if_else(condition, true_body, false_body, qubits, clbits, label=None)

Apply IfElseOp .

Note

This method does not have an associated context-manager form, because it is already handled by the if_test() method. You can use the else part of that with something such as:

from qiskit.circuit import QuantumCircuit, Qubit, Clbit
bits = [Qubit(), Qubit(), Clbit()]
qc = QuantumCircuit(bits)
qc.h(0)
qc.cx(0, 1)
qc.measure(0, 0)
with qc.if_test((bits[2], 0)) as else_:
    qc.h(0)
with else_:
    qc.x(0)

Parameters

condition (Union[Tuple[ClassicalRegister, int], Tuple[Clbit, int], Tuple[Clbit, bool]]) – A condition to be evaluated at circuit runtime which, if true, will trigger the evaluation of true_body. Can be specified as either a tuple of a ClassicalRegister to be tested for equality with a given int, or as a tuple of a Clbit to be compared to either a bool or an int.
true_body (QuantumCircuit) – The circuit body to be run if condition is true.
false_body (QuantumCircuit) – The circuit to be run if condition is false.
qubits (Sequence[Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]]) – The circuit qubits over which the if/else should be run.
clbits (Sequence[Union[Clbit, ClassicalRegister, int, slice, Sequence[Union[Clbit, int]]]]) – The circuit clbits over which the if/else should be run.
label (Optional[str]) – The string label of the instruction in the circuit.

Raises

CircuitError - If the provided condition references Clbits outside the enclosing circuit.

Return type

InstructionSet

Returns

A handle to the instruction created.

if_test

QuantumCircuit.if_test(condition: Tuple[Union[qiskit.circuit.classicalregister.ClassicalRegister, qiskit.circuit.classicalregister.Clbit], int], true_body: None, qubits: None, clbits: None, *, label: Optional[str]) \to qiskit.circuit.controlflow.if_else.IfContext

QuantumCircuit.if_test(condition: Tuple[Union[qiskit.circuit.classicalregister.ClassicalRegister, qiskit.circuit.classicalregister.Clbit], int], true_body: QuantumCircuit, qubits: Sequence[Union[qiskit.circuit.quantumregister.Qubit, qiskit.circuit.quantumregister.QuantumRegister, int, slice, Sequence[Union[qiskit.circuit.quantumregister.Qubit, int]]]], clbits: Sequence[Union[qiskit.circuit.classicalregister.Clbit, qiskit.circuit.classicalregister.ClassicalRegister, int, slice, Sequence[Union[qiskit.circuit.classicalregister.Clbit, int]]]], *, label: Optional[str] = 'None') \to qiskit.circuit.instructionset.InstructionSet

Create an if statement on this circuit.

There are two forms for calling this function. If called with all its arguments (with the possible exception of label), it will create a IfElseOp with the given true_body, and there will be no branch for the false condition (see also the if_else() method). However, if true_body (and qubits and clbits) are not passed, then this acts as a context manager, which can be used to build if statements. The return value of the with statement is a chainable context manager, which can be used to create subsequent else blocks. In this form, you do not need to keep track of the qubits or clbits you are using, because the scope will handle it for you.

For example:

from qiskit.circuit import QuantumCircuit, Qubit, Clbit
bits = [Qubit(), Qubit(), Qubit(), Clbit(), Clbit()]
qc = QuantumCircuit(bits)
 
qc.h(0)
qc.cx(0, 1)
qc.measure(0, 0)
qc.h(0)
qc.cx(0, 1)
qc.measure(0, 1)
 
with qc.if_test((bits[3], 0)) as else_:
    qc.x(2)
with else_:
    qc.h(2)
    qc.z(2)

Parameters

condition (Tuple[Union[ClassicalRegister, Clbit], int]) – A condition to be evaluated at circuit runtime which, if true, will trigger the evaluation of true_body. Can be specified as either a tuple of a ClassicalRegister to be tested for equality with a given int, or as a tuple of a Clbit to be compared to either a bool or an int.
true_body (Optional[QuantumCircuit]) – The circuit body to be run if condition is true.
qubits (Optional[Sequence[QubitSpecifier]]) – The circuit qubits over which the if/else should be run.
clbits (Optional[Sequence[ClbitSpecifier]]) – The circuit clbits over which the if/else should be run.
label (Optional[str]) – The string label of the instruction in the circuit.

Returns

depending on the call signature, either a context manager for creating the if block (it will automatically be added to the circuit at the end of the block), or an InstructionSet handle to the appended conditional operation.

Return type

InstructionSet or IfContext

Raises

CircuitError – If the provided condition references Clbits outside the enclosing circuit.
CircuitError – if an incorrect calling convention is used.

Returns

A handle to the instruction created.

initialize

QuantumCircuit.initialize(params, qubits=None)

Initialize qubits in a specific state.

|0\rangle

Parameters

params (str or list or int) –
- $str: labels of basis states of the Pauli eigenstates Z, X, Y. See$ $from_label() . Notice the order of the labels is reversed with respect to the qubit index to be applied to. Example label ‘01’ initializes the qubit zero to |1> and the qubit one to |0>.$
- $list: vector of complex amplitudes to initialize to.$
- $int: an integer that is used as a bitmap indicating which qubits to initialize$ $to |1>. Example: setting params to 5 would initialize qubit 0 and qubit 2 to |1> and qubit 1 to |0>.$
qubits (QuantumRegister or int) –
- QuantumRegister: A list of qubits to be initialized [Default: None].
- int: Index of qubit to initialized [Default: None].

Returns

a handle to the instruction that was just initialized

Return type

qiskit.circuit.Instruction

Examples

(|0\rangle - |1\rangle) / \sqrt{2}

import numpy as np
from qiskit import QuantumCircuit
 
circuit = QuantumCircuit(1)
circuit.initialize([1/np.sqrt(2), -1/np.sqrt(2)], 0)
circuit.draw()

   ┌──────────────────────────────┐
q: ┤ Initialize(0.70711,-0.70711) ├
   └──────────────────────────────┘

output:

┌──────────────────────────────┐

q_0: ┤ initialize(0.70711,-0.70711) ├

└──────────────────────────────┘

Initialize from a string two qubits in the state |10>. The order of the labels is reversed with respect to qubit index. More information about labels for basis states are in from_label() .

import numpy as np
from qiskit import QuantumCircuit
 
circuit = QuantumCircuit(2)
circuit.initialize('01', circuit.qubits)
circuit.draw()

     ┌──────────────────┐
q_0: ┤0                 ├
     │  Initialize(0,1) │
q_1: ┤1                 ├
     └──────────────────┘

output:

┌──────────────────┐

q_0: ┤0 ├

│ initialize(0,1) │

q_1: ┤1 ├

└──────────────────┘

Initialize two qubits from an array of complex amplitudes .. jupyter-execute:

import numpy as np
from qiskit import QuantumCircuit
 
circuit = QuantumCircuit(2)
circuit.initialize([0, 1/np.sqrt(2), -1.j/np.sqrt(2), 0], circuit.qubits)
circuit.draw()

output:

┌────────────────────────────────────┐

q_0: ┤0 ├

│ initialize(0,0.70711,-0.70711j,0) │

q_1: ┤1 ├

└────────────────────────────────────┘

inverse

QuantumCircuit.inverse()

Invert (take adjoint of) this circuit.

This is done by recursively inverting all gates.

Returns

the inverted circuit

Return type

QuantumCircuit

Raises

CircuitError - if the circuit cannot be inverted.

Examples

input:

┌───┐

q_0: ┤ H ├─────■──────

└───┘┌────┴─────┐

q_1: ─────┤ RX(1.57) ├

└──────────┘

output:

┌───┐

q_0: ──────■──────┤ H ├

┌─────┴─────┐└───┘

q_1: ┤ RX(-1.57) ├─────

└───────────┘

iso

QuantumCircuit.iso(isometry, q_input, q_ancillas_for_output, q_ancillas_zero=None, q_ancillas_dirty=None, epsilon=1e-10)

Attach an arbitrary isometry from m to n qubits to a circuit. In particular, this allows to attach arbitrary unitaries on n qubits (m=n) or to prepare any state on n qubits (m=0). The decomposition used here was introduced by Iten et al. in https://arxiv.org/abs/1501.06911 .

Parameters

isometry (ndarray) – an isometry from m to n qubits, i.e., a (complex) ndarray of dimension 2^n×2^m with orthonormal columns (given in the computational basis specified by the order of the ancillas and the input qubits, where the ancillas are considered to be more significant than the input qubits.).
q_input (QuantumRegister|list[Qubit]) – list of m qubits where the input to the isometry is fed in (empty list for state preparation).
q_ancillas_for_output (QuantumRegister|list[Qubit]) – list of n-m ancilla qubits that are used for the output of the isometry and which are assumed to start in the zero state. The qubits are listed with increasing significance.
q_ancillas_zero (QuantumRegister|list[Qubit]) – list of ancilla qubits which are assumed to start in the zero state. Default is q_ancillas_zero = None.
q_ancillas_dirty (QuantumRegister|list[Qubit]) – list of ancilla qubits which can start in an arbitrary state. Default is q_ancillas_dirty = None.
epsilon (float) – error tolerance of calculations. Default is epsilon = _EPS.

Returns

the isometry is attached to the quantum circuit.

Return type

QuantumCircuit

Raises

QiskitError - if the array is not an isometry of the correct size corresponding to the provided number of qubits.

isometry

QuantumCircuit.isometry(isometry, q_input, q_ancillas_for_output, q_ancillas_zero=None, q_ancillas_dirty=None, epsilon=1e-10)

Attach an arbitrary isometry from m to n qubits to a circuit. In particular, this allows to attach arbitrary unitaries on n qubits (m=n) or to prepare any state on n qubits (m=0). The decomposition used here was introduced by Iten et al. in https://arxiv.org/abs/1501.06911 .

Parameters

isometry (ndarray) – an isometry from m to n qubits, i.e., a (complex) ndarray of dimension 2^n×2^m with orthonormal columns (given in the computational basis specified by the order of the ancillas and the input qubits, where the ancillas are considered to be more significant than the input qubits.).
q_input (QuantumRegister|list[Qubit]) – list of m qubits where the input to the isometry is fed in (empty list for state preparation).
q_ancillas_for_output (QuantumRegister|list[Qubit]) – list of n-m ancilla qubits that are used for the output of the isometry and which are assumed to start in the zero state. The qubits are listed with increasing significance.
q_ancillas_zero (QuantumRegister|list[Qubit]) – list of ancilla qubits which are assumed to start in the zero state. Default is q_ancillas_zero = None.
q_ancillas_dirty (QuantumRegister|list[Qubit]) – list of ancilla qubits which can start in an arbitrary state. Default is q_ancillas_dirty = None.
epsilon (float) – error tolerance of calculations. Default is epsilon = _EPS.

Returns

the isometry is attached to the quantum circuit.

Return type

QuantumCircuit

Raises

QiskitError - if the array is not an isometry of the correct size corresponding to the provided number of qubits.

iswap

QuantumCircuit.iswap(qubit1, qubit2)

Apply iSwapGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubits to apply the gate to.
qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubits to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

mcp

QuantumCircuit.mcp(lam, control_qubits, target_qubit)

Apply MCPhaseGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

lam (Union[ParameterExpression, float]) – The angle of the rotation.
control_qubits (Sequence[Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]]) – The qubits used as the controls.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.

Return type

InstructionSet

Returns

A handle to the instructions created.

mcrx

QuantumCircuit.mcrx(theta, q_controls, q_target, use_basis_gates=False)

Apply Multiple-Controlled X rotation gate

Parameters

self (QuantumCircuit) – The QuantumCircuit object to apply the mcrx gate on.
theta (float) – angle theta
q_controls (QuantumRegister or list(Qubit)) – The list of control qubits
q_target (Qubit) – The target qubit
use_basis_gates (bool) – use p, u, cx

Raises

QiskitError - parameter errors

mcry

QuantumCircuit.mcry(theta, q_controls, q_target, q_ancillae=None, mode=None, use_basis_gates=False)

Apply Multiple-Controlled Y rotation gate

Parameters

self (QuantumCircuit) – The QuantumCircuit object to apply the mcry gate on.
theta (float) – angle theta
q_controls (list(Qubit)) – The list of control qubits
q_target (Qubit) – The target qubit
q_ancillae (QuantumRegister or tuple(QuantumRegister, int)) – The list of ancillary qubits.
mode (string) – The implementation mode to use
use_basis_gates (bool) – use p, u, cx

Raises

QiskitError - parameter errors

mcrz

QuantumCircuit.mcrz(lam, q_controls, q_target, use_basis_gates=False)

Apply Multiple-Controlled Z rotation gate

Parameters

self (QuantumCircuit) – The QuantumCircuit object to apply the mcrz gate on.
lam (float) – angle lambda
q_controls (list(Qubit)) – The list of control qubits
q_target (Qubit) – The target qubit
use_basis_gates (bool) – use p, u, cx

Raises

QiskitError - parameter errors

mct

QuantumCircuit.mct(control_qubits, target_qubit, ancilla_qubits=None, mode='noancilla')

Apply MCXGate .

The multi-cX gate can be implemented using different techniques, which use different numbers of ancilla qubits and have varying circuit depth. These modes are:

‘noancilla’: Requires 0 ancilla qubits.
‘recursion’: Requires 1 ancilla qubit if more than 4 controls are used, otherwise 0.
‘v-chain’: Requires 2 less ancillas than the number of control qubits.
‘v-chain-dirty’: Same as for the clean ancillas (but the circuit will be longer).

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubits (Sequence[Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]]) – The qubits used as the controls.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
ancilla_qubits (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]], Sequence[Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]], None]) – The qubits used as the ancillae, if the mode requires them.
mode (str) – The choice of mode, explained further above.

Return type

InstructionSet

Returns

A handle to the instructions created.

Raises

ValueError – if the given mode is not known, or if too few ancilla qubits are passed.
AttributeError – if no ancilla qubits are passed, but some are needed.

See also

QuantumCircuit.mcx: the same gate with a different name.

mcu1

QuantumCircuit.mcu1(lam, control_qubits, target_qubit)

Apply MCU1Gate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

lam (Union[ParameterExpression, float]) – The $\lambda$ rotation angle of the gate.
control_qubits (Sequence[Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]]) – The qubits used as the controls.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.

Return type

InstructionSet

Returns

A handle to the instructions created.

mcx

QuantumCircuit.mcx(control_qubits, target_qubit, ancilla_qubits=None, mode='noancilla')

Apply MCXGate .

The multi-cX gate can be implemented using different techniques, which use different numbers of ancilla qubits and have varying circuit depth. These modes are:

‘noancilla’: Requires 0 ancilla qubits.
‘recursion’: Requires 1 ancilla qubit if more than 4 controls are used, otherwise 0.
‘v-chain’: Requires 2 less ancillas than the number of control qubits.
‘v-chain-dirty’: Same as for the clean ancillas (but the circuit will be longer).

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubits (Sequence[Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]]) – The qubits used as the controls.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.
ancilla_qubits (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]], Sequence[Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]], None]) – The qubits used as the ancillae, if the mode requires them.
mode (str) – The choice of mode, explained further above.

Return type

InstructionSet

Returns

A handle to the instructions created.

Raises

ValueError – if the given mode is not known, or if too few ancilla qubits are passed.
AttributeError – if no ancilla qubits are passed, but some are needed.

measure

QuantumCircuit.measure(qubit, cbit)

Measure quantum bit into classical bit (tuples).

Parameters

qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – qubit to measure.
cbit (Union[Clbit, ClassicalRegister, int, slice, Sequence[Union[Clbit, int]]]) – classical bit to place the measurement in.

Returns

handle to the added instructions.

Return type

qiskit.circuit.InstructionSet

Raises

CircuitError - if arguments have bad format.

measure_active

QuantumCircuit.measure_active(inplace=True)

Adds measurement to all non-idle qubits. Creates a new ClassicalRegister with a size equal to the number of non-idle qubits being measured.

Returns a new circuit with measurements if inplace=False.

Parameters

inplace (bool) - All measurements inplace or return new circuit.

Returns

Returns circuit with measurements when inplace = False.

Return type

QuantumCircuit

measure_all

QuantumCircuit.measure_all(inplace=True, add_bits=True)

Adds measurement to all qubits.

By default, adds new classical bits in a ClassicalRegister to store these measurements. If add_bits=False, the results of the measurements will instead be stored in the already existing classical bits, with qubit n being measured into classical bit n .

Returns a new circuit with measurements if inplace=False .

Parameters

inplace (bool) – All measurements inplace or return new circuit.
add_bits (bool) – Whether to add new bits to store the results.

Returns

Returns circuit with measurements when inplace=False .

Return type

QuantumCircuit

Raises

CircuitError - if add_bits=False but there are not enough classical bits.

ms

QuantumCircuit.ms(theta, qubits)

Apply MSGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The angle of the rotation.
qubits (Sequence[Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]]) – The qubits to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

num_connected_components

QuantumCircuit.num_connected_components(unitary_only=False)

How many non-entangled subcircuits can the circuit be factored to.

Parameters

unitary_only (bool) - Compute only unitary part of graph.

Returns

Number of connected components in circuit.

Return type

int

num_nonlocal_gates

QuantumCircuit.num_nonlocal_gates()

Return number of non-local gates (i.e. involving 2+ qubits).

Conditional nonlocal gates are also included.

Return type

int

num_tensor_factors

QuantumCircuit.num_tensor_factors()

Computes the number of tensor factors in the unitary (quantum) part of the circuit only.

Notes

This is here for backwards compatibility, and will be removed in a future release of Qiskit. You should call num_unitary_factors instead.

Return type

int

num_unitary_factors

QuantumCircuit.num_unitary_factors()

Computes the number of tensor factors in the unitary (quantum) part of the circuit only.

Return type

int

p

QuantumCircuit.p(theta, qubit)

Apply PhaseGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – THe angle of the rotation.
qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

pauli

QuantumCircuit.pauli(pauli_string, qubits)

Apply PauliGate .

Parameters

pauli_string (str) – A string representing the Pauli operator to apply, e.g. ‘XX’.
qubits (Sequence[Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]]) – The qubits to apply this gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

power

QuantumCircuit.power(power, matrix_power=False)

Raise this circuit to the power of power .

If power is a positive integer and matrix_power is False, this implementation defaults to calling repeat . Otherwise, if the circuit is unitary, the matrix is computed to calculate the matrix power.

Parameters

power (float) – The power to raise this circuit to.
matrix_power (bool) – If True, the circuit is converted to a matrix and then the matrix power is computed. If False, and power is a positive integer, the implementation defaults to repeat.

Raises

CircuitError - If the circuit needs to be converted to a gate but it is not unitary.

Returns

A circuit implementing this circuit raised to the power of power .

Return type

QuantumCircuit

qasm

QuantumCircuit.qasm(formatted=False, filename=None, encoding=None)

Return OpenQASM string.

Parameters

formatted (bool) – Return formatted Qasm string.
filename (str) – Save Qasm to file with name ‘filename’.
encoding (str) – Optionally specify the encoding to use for the output file if filename is specified. By default this is set to the system’s default encoding (ie whatever locale.getpreferredencoding() returns) and can be set to any valid codec or alias from stdlib’s codec module

Returns

If formatted=False.

Return type

str

Raises

MissingOptionalLibraryError – If pygments is not installed and formatted is True.
QasmError – If circuit has free parameters.

qbit_argument_conversion

QuantumCircuit.qbit_argument_conversion(qubit_representation)

Converts several qubit representations (such as indexes, range, etc.) into a list of qubits.

Parameters

qubit_representation (Object) - representation to expand

Returns

the resolved instances of the qubits.

Return type

List(Qubit)

qubit_duration

QuantumCircuit.qubit_duration(*qubits)

Return the duration between the start and stop time of the first and last instructions, excluding delays, over the supplied qubits. Its time unit is self.unit .

Parameters

*qubits - Qubits within self to include.

Return type

float

Returns

Return the duration between the first start and last stop time of non-delay instructions

qubit_start_time

QuantumCircuit.qubit_start_time(*qubits)

Return the start time of the first instruction, excluding delays, over the supplied qubits. Its time unit is self.unit .

Return 0 if there are no instructions over qubits

Parameters

*qubits – Qubits within self to include. Integers are allowed for qubits, indicating
of self.qubits. (indices) –

Return type

float

Returns

Return the start time of the first instruction, excluding delays, over the qubits

Raises

CircuitError - if self is a not-yet scheduled circuit.

qubit_stop_time

QuantumCircuit.qubit_stop_time(*qubits)

Return the stop time of the last instruction, excluding delays, over the supplied qubits. Its time unit is self.unit .

Return 0 if there are no instructions over qubits

Parameters

*qubits – Qubits within self to include. Integers are allowed for qubits, indicating
of self.qubits. (indices) –

Return type

float

Returns

Return the stop time of the last instruction, excluding delays, over the qubits

Raises

CircuitError - if self is a not-yet scheduled circuit.

r

QuantumCircuit.r(theta, phi, qubit)

Apply RGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The angle of the rotation.
phi (Union[ParameterExpression, float]) – The angle of the axis of rotation in the x-y plane.
qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

rcccx

QuantumCircuit.rcccx(control_qubit1, control_qubit2, control_qubit3, target_qubit)

Apply RC3XGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the first control.
control_qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the second control.
control_qubit3 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the third control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.

Return type

InstructionSet

Returns

A handle to the instructions created.

rccx

QuantumCircuit.rccx(control_qubit1, control_qubit2, target_qubit)

Apply RCCXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the first control.
control_qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the second control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.

Return type

InstructionSet

Returns

A handle to the instructions created.

remove_final_measurements

QuantumCircuit.remove_final_measurements(inplace=True)

Removes final measurements and barriers on all qubits if they are present. Deletes the classical registers that were used to store the values from these measurements that become idle as a result of this operation, and deletes classical bits that are referenced only by removed registers, or that aren’t referenced at all but have become idle as a result of this operation.

Measurements and barriers are considered final if they are followed by no other operations (aside from other measurements or barriers.)

Parameters

inplace (bool) - All measurements removed inplace or return new circuit.

Returns

Returns the resulting circuit when inplace=False, else None.

Return type

QuantumCircuit

repeat

QuantumCircuit.repeat(reps)

Repeat this circuit reps times.

Parameters

reps (int) - How often this circuit should be repeated.

Returns

A circuit containing reps repetitions of this circuit.

Return type

QuantumCircuit

reset

QuantumCircuit.reset(qubit)

Reset the quantum bit(s) to their default state.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - qubit(s) to reset.

Returns

handle to the added instruction.

Return type

qiskit.circuit.InstructionSet

reverse_bits

QuantumCircuit.reverse_bits()

Return a circuit with the opposite order of wires.

The circuit is “vertically” flipped. If a circuit is defined over multiple registers, the resulting circuit will have the same registers but with their order flipped.

This method is useful for converting a circuit written in little-endian convention to the big-endian equivalent, and vice versa.

Returns

the circuit with reversed bit order.

Return type

QuantumCircuit

Examples

input:

┌───┐

q_0: ┤ H ├─────■──────

└───┘┌────┴─────┐

q_1: ─────┤ RX(1.57) ├

└──────────┘

output:

┌──────────┐

q_0: ─────┤ RX(1.57) ├

┌───┐└────┬─────┘

q_1: ┤ H ├─────■──────

└───┘

reverse_ops

QuantumCircuit.reverse_ops()

Reverse the circuit by reversing the order of instructions.

This is done by recursively reversing all instructions. It does not invert (adjoint) any gate.

Returns

the reversed circuit.

Return type

QuantumCircuit

Examples

input:

┌───┐

q_0: ┤ H ├─────■──────

└───┘┌────┴─────┐

q_1: ─────┤ RX(1.57) ├

└──────────┘

output:

┌───┐

q_0: ─────■──────┤ H ├

┌────┴─────┐└───┘

q_1: ┤ RX(1.57) ├─────

└──────────┘

rv

QuantumCircuit.rv(vx, vy, vz, qubit)

Apply RVGate .

For the full matrix form of this gate, see the underlying gate documentation.

v

Parameters

vx (Union[ParameterExpression, float]) – x-compenent of the rotation axis.
vy (Union[ParameterExpression, float]) – y-compenent of the rotation axis.
vz (Union[ParameterExpression, float]) – z-compenent of the rotation axis.
qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

rx

QuantumCircuit.rx(theta, qubit, label=None)

Apply RXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The rotation angle of the gate.
qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.
label (Optional[str]) – The string label of the gate in the circuit.

Return type

InstructionSet

Returns

A handle to the instructions created.

rxx

QuantumCircuit.rxx(theta, qubit1, qubit2)

Apply RXXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The angle of the rotation.
qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.
qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

ry

QuantumCircuit.ry(theta, qubit, label=None)

Apply RYGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The rotation angle of the gate.
qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.
label (Optional[str]) – The string label of the gate in the circuit.

Return type

InstructionSet

Returns

A handle to the instructions created.

ryy

QuantumCircuit.ryy(theta, qubit1, qubit2)

Apply RYYGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The rotation angle of the gate.
qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.
qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

rz

QuantumCircuit.rz(phi, qubit)

Apply RYGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

phi (Union[ParameterExpression, float]) – The rotation angle of the gate.
qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

rzx

QuantumCircuit.rzx(theta, qubit1, qubit2)

Apply RZXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The rotation angle of the gate.
qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.
qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

rzz

QuantumCircuit.rzz(theta, qubit1, qubit2)

Apply RZZGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The rotation angle of the gate.
qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.
qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

s

QuantumCircuit.s(qubit)

Apply SGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

save_amplitudes

QuantumCircuit.save_amplitudes(params, label='amplitudes', pershot=False, conditional=False)

Save complex statevector amplitudes.

Parameters

params (List[int] or List[str]) – the basis states to return amplitudes for.
label (str) – the key for retrieving saved data from results.
pershot (bool) – if True save a list of amplitudes vectors for each shot of the simulation rather than the a single amplitude vector [Default: False].
conditional (bool) – if True save the amplitudes vector conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - if params is invalid for the specified number of qubits.

save_amplitudes_squared

QuantumCircuit.save_amplitudes_squared(params, label='amplitudes_squared', unnormalized=False, pershot=False, conditional=False)

Save squared statevector amplitudes (probabilities).

Parameters

params (List[int] or List[str]) – the basis states to return amplitudes for.
label (str) – the key for retrieving saved data from results.
unnormalized (bool) – If True return save the unnormalized accumulated probabilities over all shots [Default: False].
pershot (bool) – if True save a list of probability vectors for each shot of the simulation rather than the a single amplitude vector [Default: False].
conditional (bool) – if True save the probability vector conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - if params is invalid for the specified number of qubits.

save_density_matrix

QuantumCircuit.save_density_matrix(qubits=None, label='density_matrix', unnormalized=False, pershot=False, conditional=False)

Save the current simulator quantum state as a density matrix.

Parameters

qubits (list or None) – the qubits to save reduced density matrix on. If None the full density matrix of qubits will be saved [Default: None].
label (str) – the key for retrieving saved data from results.
unnormalized (bool) – If True return save the unnormalized accumulated or conditional accumulated density matrix over all shots [Default: False].
pershot (bool) – if True save a list of density matrices for each shot of the simulation rather than the average over all shots [Default: False].
conditional (bool) – if True save the average or pershot data conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

save_expectation_value

QuantumCircuit.save_expectation_value(operator, qubits, label='expectation_value', unnormalized=False, pershot=False, conditional=False)

Save the expectation value of a Hermitian operator.

Parameters

operator (Pauli orSparsePauliOp orOperator) – a Hermitian operator.
qubits (list) – circuit qubits to apply instruction.
label (str) – the key for retrieving saved data from results.
unnormalized (bool) – If True return save the unnormalized accumulated or conditional accumulated expectation value over all shot [Default: False].
pershot (bool) – if True save a list of expectation values for each shot of the simulation rather than the average over all shots [Default: False].
conditional (bool) – if True save the average or pershot data conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - if the input operator is invalid or not Hermitian.

Note

This method appends a SaveExpectationValue instruction to the quantum circuit.

save_expectation_value_variance

QuantumCircuit.save_expectation_value_variance(operator, qubits, label='expectation_value_variance', unnormalized=False, pershot=False, conditional=False)

Save the expectation value of a Hermitian operator.

Parameters

operator (Pauli orSparsePauliOp orOperator) – a Hermitian operator.
qubits (list) – circuit qubits to apply instruction.
label (str) – the key for retrieving saved data from results.
unnormalized (bool) – If True return save the unnormalized accumulated or conditional accumulated expectation value and variance over all shot [Default: False].
pershot (bool) – if True save a list of expectation values and variances for each shot of the simulation rather than the average over all shots [Default: False].
conditional (bool) – if True save the data conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - if the input operator is invalid or not Hermitian.

Note

This method appends a SaveExpectationValueVariance instruction to the quantum circuit.

save_matrix_product_state

QuantumCircuit.save_matrix_product_state(label='matrix_product_state', pershot=False, conditional=False)

Save the current simulator quantum state as a matrix product state.

Parameters

label (str) – the key for retrieving saved data from results.
pershot (bool) – if True save the mps for each shot of the simulation [Default: False].
conditional (bool) – if True save pershot data conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

save_probabilities

QuantumCircuit.save_probabilities(qubits=None, label='probabilities', unnormalized=False, pershot=False, conditional=False)

Save measurement outcome probabilities vector.

Parameters

qubits (list or None) – the qubits to apply snapshot to. If None all qubits will be snapshot [Default: None].
label (str) – the key for retrieving saved data from results.
unnormalized (bool) – If True return save the unnormalized accumulated probabilities over all shots [Default: False].
pershot (bool) – if True save a list of probabilities for each shot of the simulation rather than the average over all shots [Default: False].
conditional (bool) – if True save the probabilities data conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

save_probabilities_dict

QuantumCircuit.save_probabilities_dict(qubits=None, label='probabilities', unnormalized=False, pershot=False, conditional=False)

Save measurement outcome probabilities vector.

Parameters

qubits (list or None) – the qubits to apply snapshot to. If None all qubits will be snapshot [Default: None].
label (str) – the key for retrieving saved data from results.
unnormalized (bool) – If True return save the unnormalized accumulated probabilities over all shots [Default: False].
pershot (bool) – if True save a list of probabilities for each shot of the simulation rather than the average over all shots [Default: False].
conditional (bool) – if True save the probabilities data conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

save_stabilizer

QuantumCircuit.save_stabilizer(label='stabilizer', pershot=False, conditional=False)

Save the current stabilizer simulator quantum state as a Clifford.

Parameters

label (str) – the key for retrieving saved data from results.
pershot (bool) – if True save a list of Cliffords for each shot of the simulation [Default: False].
conditional (bool) – if True save pershot data conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

Note

This instruction is always defined across all qubits in a circuit.

save_state

QuantumCircuit.save_state(label=None, pershot=False, conditional=False)

Save the current simulator quantum state.

Parameters

label (str or None) – Optional, the key for retrieving saved data from results. If None the key will be the state type of the simulator.
pershot (bool) – if True save a list of statevectors for each shot of the simulation [Default: False].
conditional (bool) – if True save pershot data conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

save_statevector

QuantumCircuit.save_statevector(label='statevector', pershot=False, conditional=False)

Save the current simulator quantum state as a statevector.

Parameters

pershot (bool) – if True save a list of statevectors for each shot of the simulation [Default: False].
label (str) – the key for retrieving saved data from results.
conditional (bool) – if True save pershot data conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

Note

This instruction is always defined across all qubits in a circuit.

save_statevector_dict

QuantumCircuit.save_statevector_dict(label='statevector', pershot=False, conditional=False)

Save the current simulator quantum state as a statevector as a dict.

Parameters

label (str) – the key for retrieving saved data from results.
pershot (bool) – if True save a list of statevectors for each shot of the simulation [Default: False].
conditional (bool) – if True save pershot data conditional on the current classical register values [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

Note

This instruction is always defined across all qubits in a circuit.

save_superop

QuantumCircuit.save_superop(label='superop', pershot=False)

Save the current state of the superop simulator.

Parameters

label (str) – the key for retrieving saved data from results.
pershot (bool) – if True save a list of SuperOp matrices for each shot of the simulation [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

Note

This instruction is always defined across all qubits in a circuit.

save_unitary

QuantumCircuit.save_unitary(label='unitary', pershot=False)

Save the current state of the unitary simulator.

Parameters

label (str) – the key for retrieving saved data from results.
pershot (bool) – if True save a list of unitaries for each shot of the simulation [Default: False].

Returns

with attached instruction.

Return type

QuantumCircuit

Note

This instruction is always defined across all qubits in a circuit.

sdg

QuantumCircuit.sdg(qubit)

Apply SdgGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

set_density_matrix

QuantumCircuit.set_density_matrix(state)

Set the density matrix state of the simulator.

Parameters

state (DensityMatrix) - a density matrix.

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - If the density matrix is the incorrect size for the current circuit.

set_matrix_product_state

QuantumCircuit.set_matrix_product_state(state)

Set the matrix product state of the simulator.

Parameters

state (Tuple[List[Tuple[np.array[complex_t]]]], List[List[float]]) - A matrix_product_state.

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - If the structure of the state is incorrect

set_stabilizer

QuantumCircuit.set_stabilizer(state)

Set the Clifford stabilizer state of the simulator.

Parameters

state (Clifford) - A clifford operator.

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - If the state is the incorrect size for the current circuit.

set_statevector

QuantumCircuit.set_statevector(state)

Set the statevector state of the simulator.

Parameters

state (Statevector) - A state matrix.

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - If the state is the incorrect size for the current circuit.

set_superop

QuantumCircuit.set_superop(state)

Set the superop state of the simulator.

Parameters

state (QuantumChannel) - A CPTP quantum channel.

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError – If the state is the incorrect size for the current circuit.
ExtensionError – if the input QuantumChannel is not CPTP.

set_unitary

QuantumCircuit.set_unitary(state)

Set the state state of the simulator.

Parameters

state (Operator) - A state matrix.

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError – If the state is the incorrect size for the current circuit.
ExtensionError – if the input matrix is not unitary.

size

QuantumCircuit.size(filter_function=<function QuantumCircuit.<lambda>>)

Returns total number of instructions in circuit.

Parameters

filter_function (callable) - a function to filter out some instructions. Should take as input a tuple of (Instruction, list(Qubit), list(Clbit)). By default filters out “directives”, such as barrier or snapshot.

Returns

Total number of gate operations.

Return type

int

snapshot

QuantumCircuit.snapshot(label, snapshot_type='statevector', qubits=None, params=None)

Take a statevector snapshot of the internal simulator representation. Works on all qubits, and prevents reordering (like barrier). :param label: a snapshot label to report the result :type label: str :param snapshot_type: the type of the snapshot. :type snapshot_type: str :param qubits: the qubits to apply snapshot to [Default: None]. :type qubits: list or None :param params: the parameters for snapshot_type [Default: None]. :type params: list or None

Returns

with attached command

Return type

QuantumCircuit

Raises

ExtensionError - malformed command

snapshot_density_matrix

QuantumCircuit.snapshot_density_matrix(label, qubits=None)

Take a density matrix snapshot of simulator state.

Parameters

label (str) – a snapshot label to report the result
qubits (list or None) – the qubits to apply snapshot to. If None all qubits will be snapshot [Default: None].

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - if snapshot is invalid.

Deprecated since version 0.9.0

This instruction has been deprecated and will be removed no earlier than 3 months from the 0.9.0 release date. It has been superseded by the qiskit.providers.aer.library.save_density_matrix circuit method.

snapshot_expectation_value

QuantumCircuit.snapshot_expectation_value(label, op, qubits, single_shot=False, variance=False)

Take a snapshot of expectation value <O> of an Operator.

Parameters

label (str) – a snapshot label to report the result
op (Operator) – operator to snapshot
qubits (list) – the qubits to snapshot.
single_shot (bool) – return list for each shot rather than average [Default: False]
variance (bool) – compute variance of values [Default: False]

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - if snapshot is invalid.

Deprecated since version 0.9.0

This instruction has been deprecated and will be removed no earlier than 3 months from the 0.9.0 release date. It has been superseded by the qiskit.providers.aer.library.save_expectation_value() and qiskit.providers.aer.library.save_expectation_value_variance() circuit methods.

snapshot_probabilities

QuantumCircuit.snapshot_probabilities(label, qubits, variance=False)

Take a probability snapshot of the simulator state.

Parameters

label (str) – a snapshot label to report the result
qubits (list) – the qubits to snapshot.
variance (bool) – compute variance of probabilities [Default: False]

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - if snapshot is invalid.

Deprecated since version 0.9.0

This instruction has been deprecated and will be removed no earlier than 3 months from the 0.9.0 release date. It has been superseded by the qiskit.providers.aer.library.save_probabilities() and qiskit.providers.aer.library.save_probabilities_dict() circuit methods.

snapshot_stabilizer

QuantumCircuit.snapshot_stabilizer(label)

Take a stabilizer snapshot of the simulator state.

Parameters

label (str) - a snapshot label to report the result.

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - if snapshot is invalid.

Additional Information:

This snapshot is always performed on all qubits in a circuit. The number of qubits parameter specifies the size of the instruction as a barrier and should be set to the number of qubits in the circuit.

Deprecated since version 0.9.0

This instruction has been deprecated and will be removed no earlier than 3 months from the 0.9.0 release date. It has been superseded by the qiskit.providers.aer.library.save_stabilizer() circuit method.

snapshot_statevector

QuantumCircuit.snapshot_statevector(label)

Take a statevector snapshot of the simulator state.

Parameters

label (str) - a snapshot label to report the result.

Returns

with attached instruction.

Return type

QuantumCircuit

Raises

ExtensionError - if snapshot is invalid.

Additional Information:

This snapshot is always performed on all qubits in a circuit. The number of qubits parameter specifies the size of the instruction as a barrier and should be set to the number of qubits in the circuit.

Deprecated since version 0.9.0

This instruction has been deprecated and will be removed no earlier than 3 months from the 0.9.0 release date. It has been superseded by the qiskit.providers.aer.library.save_statevector circuit method.

squ

QuantumCircuit.squ(unitary_matrix, qubit, mode='ZYZ', up_to_diagonal=False)

Decompose an arbitrary 2*2 unitary into three rotation gates.

Note that the decomposition is up to a global phase shift. (This is a well known decomposition, which can be found for example in Nielsen and Chuang’s book “Quantum computation and quantum information”.)

Parameters

unitary_matrix (ndarray) – 2*2 unitary (given as a (complex) ndarray).
qubit (QuantumRegister orQubit) – The qubit which the gate is acting on.
mode (string) – determines the used decomposition by providing the rotation axes. The allowed modes are: “ZYZ” (default)
up_to_diagonal (bool) – if set to True, the single-qubit unitary is decomposed up to a diagonal matrix, i.e. a unitary u’ is implemented such that there exists a 2*2 diagonal gate d with u = d.dot(u’)

Returns

The single-qubit unitary instruction attached to the circuit.

Return type

InstructionSet

Raises

QiskitError - if the format is wrong; if the array u is not unitary

swap

QuantumCircuit.swap(qubit1, qubit2)

Apply SwapGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubits to apply the gate to.
qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubits to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

sx

QuantumCircuit.sx(qubit)

Apply SXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

sxdg

QuantumCircuit.sxdg(qubit)

Apply SXdgGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

t

QuantumCircuit.t(qubit)

Apply TGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

tdg

QuantumCircuit.tdg(qubit)

Apply TdgGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

tensor

QuantumCircuit.tensor(other, inplace=False)

Tensor self with other .

Remember that in the little-endian convention the leftmost operation will be at the bottom of the circuit. See also the docs for more information.

     ┌────────┐        ┌─────┐          ┌─────┐
q_0: ┤ bottom ├ ⊗ q_0: ┤ top ├  = q_0: ─┤ top ├──
     └────────┘        └─────┘         ┌┴─────┴─┐
                                  q_1: ┤ bottom ├
                                       └────────┘

Parameters

other (QuantumCircuit) – The other circuit to tensor this circuit with.
inplace (bool) – If True, modify the object. Otherwise return composed circuit.

Examples

from qiskit import QuantumCircuit
top = QuantumCircuit(1)
top.x(0);
bottom = QuantumCircuit(2)
bottom.cry(0.2, 0, 1);
tensored = bottom.tensor(top)
print(tensored.draw())

        ┌───┐   
q_0: ───┤ X ├───
        └───┘   
q_1: ─────■─────
     ┌────┴────┐
q_2: ┤ Ry(0.2) ├
     └─────────┘

Returns

The tensored circuit (returns None if inplace==True).

Return type

QuantumCircuit

to_gate

QuantumCircuit.to_gate(parameter_map=None, label=None)

Create a Gate out of this circuit.

Parameters

parameter_map (dict) – For parameterized circuits, a mapping from parameters in the circuit to parameters to be used in the gate. If None, existing circuit parameters will also parameterize the gate.
label (str) – Optional gate label.

Returns

a composite gate encapsulating this circuit (can be decomposed back)

Return type

Gate

to_instruction

QuantumCircuit.to_instruction(parameter_map=None, label=None)

Create an Instruction out of this circuit.

Parameters

parameter_map (dict) – For parameterized circuits, a mapping from parameters in the circuit to parameters to be used in the instruction. If None, existing circuit parameters will also parameterize the instruction.
label (str) – Optional gate label.

Returns

a composite instruction encapsulating this circuit (can be decomposed back)

Return type

qiskit.circuit.Instruction

toffoli

QuantumCircuit.toffoli(control_qubit1, control_qubit2, target_qubit)

Apply CCXGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

control_qubit1 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the first control.
control_qubit2 (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) used as the second control.
target_qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) targeted by the gate.

Return type

InstructionSet

Returns

A handle to the instructions created.

See also

QuantumCircuit.ccx: the same gate with a different name.

u

QuantumCircuit.u(theta, phi, lam, qubit)

Apply UGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The $\theta$ rotation angle of the gate.
phi (Union[ParameterExpression, float]) – The $\phi$ rotation angle of the gate.
lam (Union[ParameterExpression, float]) – The $\lambda$ rotation angle of the gate.
qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

u1

QuantumCircuit.u1(theta, qubit)

Apply U1Gate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The $\theta$ rotation angle of the gate.
qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

u2

QuantumCircuit.u2(phi, lam, qubit)

Apply U2Gate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

phi (Union[ParameterExpression, float]) – The $\phi$ rotation angle of the gate.
lam (Union[ParameterExpression, float]) – The $\lambda$ rotation angle of the gate.
qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

u3

QuantumCircuit.u3(theta, phi, lam, qubit)

Apply U3Gate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

theta (Union[ParameterExpression, float]) – The $\theta$ rotation angle of the gate.
phi (Union[ParameterExpression, float]) – The $\phi$ rotation angle of the gate.
lam (Union[ParameterExpression, float]) – The $\lambda$ rotation angle of the gate.
qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

uc

QuantumCircuit.uc(gate_list, q_controls, q_target, up_to_diagonal=False)

Attach a uniformly controlled gates (also called multiplexed gates) to a circuit.

The decomposition was introduced by Bergholm et al. in https://arxiv.org/pdf/quant-ph/0410066.pdf .

Parameters

gate_list (list[ndarray]) – list of two qubit unitaries [U_0,…,U_{2^k-1}], where each single-qubit unitary U_i is a given as a 2*2 array
q_controls (QuantumRegister|list[(QuantumRegister,int)]) – list of k control qubits. The qubits are ordered according to their significance in the computational basis. For example if q_controls=[q[1],q[2]] (with q = QuantumRegister(2)), the unitary U_0 is performed if q[1] and q[2] are in the state zero, U_1 is performed if q[2] is in the state zero and q[1] is in the state one, and so on
q_target (QuantumRegister|(QuantumRegister,int)) – target qubit, where we act on with the single-qubit gates.
up_to_diagonal (bool) – If set to True, the uniformly controlled gate is decomposed up to a diagonal gate, i.e. a unitary u’ is implemented such that there exists a diagonal gate d with u = d.dot(u’), where the unitary u describes the uniformly controlled gate

Returns

the uniformly controlled gate is attached to the circuit.

Return type

QuantumCircuit

Raises

QiskitError - if the list number of control qubits does not correspond to the provided number of single-qubit unitaries; if an input is of the wrong type

ucrx

QuantumCircuit.ucrx(angle_list, q_controls, q_target)

Attach a uniformly controlled (also called multiplexed) Rx rotation gate to a circuit.

The decomposition is base on https://arxiv.org/pdf/quant-ph/0406176.pdf by Shende et al.

Parameters

angle_list (list) – list of (real) rotation angles $[a_0,...,a_{2^k-1}]$
q_controls (QuantumRegister|list) – list of k control qubits (or empty list if no controls). The control qubits are ordered according to their significance in increasing order: For example if q_controls=[q[0],q[1]] (with q = QuantumRegister(2)), the rotation Rx(a_0) is performed if q[0] and q[1] are in the state zero, the rotation Rx(a_1) is performed if q[0] is in the state one and q[1] is in the state zero, and so on
q_target (QuantumRegister|Qubit) – target qubit, where we act on with the single-qubit rotation gates

Returns

the uniformly controlled rotation gate is attached to the circuit.

Return type

QuantumCircuit

Raises

QiskitError - if the list number of control qubits does not correspond to the provided number of single-qubit unitaries; if an input is of the wrong type

ucry

QuantumCircuit.ucry(angle_list, q_controls, q_target)

Attach a uniformly controlled (also called multiplexed) Ry rotation gate to a circuit.

The decomposition is base on https://arxiv.org/pdf/quant-ph/0406176.pdf by Shende et al.

Parameters

angle_list (list[numbers) – list of (real) rotation angles $[a_0,...,a_{2^k-1}]$
q_controls (QuantumRegister|list[Qubit]) – list of k control qubits (or empty list if no controls). The control qubits are ordered according to their significance in increasing order: For example if q_controls=[q[0],q[1]] (with q = QuantumRegister(2)), the rotation Ry(a_0) is performed if q[0] and q[1] are in the state zero, the rotation Ry(a_1) is performed if q[0] is in the state one and q[1] is in the state zero, and so on
q_target (QuantumRegister|Qubit) – target qubit, where we act on with the single-qubit rotation gates

Returns

the uniformly controlled rotation gate is attached to the circuit.

Return type

QuantumCircuit

Raises

QiskitError - if the list number of control qubits does not correspond to the provided number of single-qubit unitaries; if an input is of the wrong type

ucrz

QuantumCircuit.ucrz(angle_list, q_controls, q_target)

Attach a uniformly controlled (also called multiplexed gates) Rz rotation gate to a circuit.

The decomposition is base on https://arxiv.org/pdf/quant-ph/0406176.pdf by Shende et al.

Parameters

angle_list (list[numbers) – list of (real) rotation angles [a_0,…,a_{2^k-1}]
q_controls (QuantumRegister|list[Qubit]) – list of k control qubits (or empty list if no controls). The control qubits are ordered according to their significance in increasing order: For example if q_controls=[q[1],q[2]] (with q = QuantumRegister(2)), the rotation Rz(a_0)is performed if q[1] and q[2] are in the state zero, the rotation Rz(a_1) is performed if q[1] is in the state one and q[2] is in the state zero, and so on
q_target (QuantumRegister|Qubit) – target qubit, where we act on with the single-qubit rotation gates

Returns

the uniformly controlled rotation gate is attached to the circuit.

Return type

QuantumCircuit

Raises

QiskitError - if the list number of control qubits does not correspond to the provided number of single-qubit unitaries; if an input is of the wrong type

unitary

QuantumCircuit.unitary(obj, qubits, label=None)

Apply unitary gate to q.

while_loop

QuantumCircuit.while_loop(condition: Tuple[Union[qiskit.circuit.classicalregister.ClassicalRegister, qiskit.circuit.classicalregister.Clbit], int], body: None, qubits: None, clbits: None, *, label: Optional[str]) \to qiskit.circuit.controlflow.while_loop.WhileLoopContext

QuantumCircuit.while_loop(condition: Tuple[Union[qiskit.circuit.classicalregister.ClassicalRegister, qiskit.circuit.classicalregister.Clbit], int], body: QuantumCircuit, qubits: Sequence[Union[qiskit.circuit.quantumregister.Qubit, qiskit.circuit.quantumregister.QuantumRegister, int, slice, Sequence[Union[qiskit.circuit.quantumregister.Qubit, int]]]], clbits: Sequence[Union[qiskit.circuit.classicalregister.Clbit, qiskit.circuit.classicalregister.ClassicalRegister, int, slice, Sequence[Union[qiskit.circuit.classicalregister.Clbit, int]]]], *, label: Optional[str]) \to qiskit.circuit.instructionset.InstructionSet

Create a while loop on this circuit.

There are two forms for calling this function. If called with all its arguments (with the possible exception of label), it will create a WhileLoopOp with the given body . If body (and qubits and clbits) are not passed, then this acts as a context manager, which will automatically build a WhileLoopOp when the scope finishes. In this form, you do not need to keep track of the qubits or clbits you are using, because the scope will handle it for you.

Example usage:

from qiskit.circuit import QuantumCircuit, Clbit, Qubit
bits = [Qubit(), Qubit(), Clbit()]
qc = QuantumCircuit(bits)
 
with qc.while_loop((bits[2], 0)):
    qc.h(0)
    qc.cx(0, 1)
    qc.measure(0, 0)

Parameters

condition (Tuple[Union[ClassicalRegister, Clbit], int]) – An equality condition to be checked prior to executing body. The left-hand side of the condition must be a ClassicalRegister or a Clbit, and the right-hand side must be an integer or boolean.
body (Optional[QuantumCircuit]) – The loop body to be repeatedly executed. Omit this to use the context-manager mode.
qubits (Optional[Sequence[Qubit]]) – The circuit qubits over which the loop body should be run. Omit this to use the context-manager mode.
clbits (Optional[Sequence[Clbit]]) – The circuit clbits over which the loop body should be run. Omit this to use the context-manager mode.
label (Optional[str]) – The string label of the instruction in the circuit.

Returns

If used in context-manager mode, then this should be used as a with resource, which will infer the block content and operands on exit. If the full form is used, then this returns a handle to the instructions created.

Return type

InstructionSet or WhileLoopContext

Raises

CircuitError - if an incorrect calling convention is used.

width

QuantumCircuit.width()

Return number of qubits plus clbits in circuit.

Returns

Width of circuit.

Return type

int

x

QuantumCircuit.x(qubit, label=None)

Apply XGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union[Qubit, QuantumRegister, int, slice, Sequence[Union[Qubit, int]]]) – The qubit(s) to apply the gate to.
label (Optional[str]) – The string label of the gate in the circuit.

Return type

InstructionSet

Returns

A handle to the instructions created.

y

QuantumCircuit.y(qubit)

Apply YGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

z

QuantumCircuit.z(qubit)

Apply ZGate .

For the full matrix form of this gate, see the underlying gate documentation.

Parameters

qubit (Union [Qubit, QuantumRegister, int, slice, Sequence [Union [Qubit, int]]]) - The qubit(s) to apply the gate to.

Return type

InstructionSet

Returns

A handle to the instructions created.

Attributes

ancillas

Returns a list of ancilla bits in the order that the registers were added.

Return type

List [AncillaQubit]

calibrations

Return calibration dictionary.

The custom pulse definition of a given gate is of the form

{‘gate_name’: {(qubits, params): schedule}}

Return type

dict

clbits

Returns a list of classical bits in the order that the registers were added.

Return type

List [Clbit]

data

Return the circuit data (instructions and context).

Returns

a list-like object containing the tuples for the circuit’s data.

Each tuple is in the format (instruction, qargs, cargs), where instruction is an Instruction (or subclass) object, qargs is a list of Qubit objects, and cargs is a list of Clbit objects.

Return type

QuantumCircuitData

extension_lib

Default value:'include "qelib1.inc";'

global_phase

Return the global phase of the circuit in radians.

Return type

Union [ParameterExpression, float]

header

Default value:'OPENQASM 2.0;'

instances

Default value: 9

metadata

The user provided metadata associated with the circuit

The metadata for the circuit is a user provided dict of metadata for the circuit. It will not be used to influence the execution or operation of the circuit, but it is expected to be passed between all transforms of the circuit (ie transpilation) and that providers will associate any circuit metadata with the results it returns from execution of that circuit.

Return type

dict

num_ancillas

Return the number of ancilla qubits.

Return type

int

num_clbits

Return number of classical bits.

Return type

int

num_parameters

Convenience function to get the number of parameter objects in the circuit.

Return type

int

num_qubits

Return number of qubits.

Return type

int

parameters

Convenience function to get the parameters defined in the parameter table.

Return type

ParameterView

prefix

Default value:'circuit'

qubits

Returns a list of quantum bits in the order that the registers were added.

Return type

List [Qubit]

Was this page helpful?

Report a bug or request content on GitHub.