RZXGate

class qiskit.circuit.library.RZXGate(theta, label=None, *, duration=None, unit='dt')

Bases: Gate

A parametric 2-qubit $Z \otimes X$ interaction (rotation about ZX).

This gate is maximally entangling at $\theta = \pi/2$ .

The cross-resonance gate (CR) for superconducting qubits implements a ZX interaction (however other terms are also present in an experiment).

Can be applied to a QuantumCircuit with the rzx() method.

Circuit Symbol:

     ┌─────────┐
q_0: ┤0        ├
     │  Rzx(θ) │
q_1: ┤1        ├
     └─────────┘

Matrix Representation:

\providecommand{\rotationangle}{\frac{\theta}{2}} R_{ZX}(\theta)\ q_0, q_1 = \exp\left(-i \frac{\theta}{2} X{\otimes}Z\right) = \begin{pmatrix} \cos\left(\rotationangle\right) & 0 & -i\sin\left(\rotationangle\right) & 0 \\ 0 & \cos\left(\rotationangle\right) & 0 & i\sin\left(\rotationangle\right) \\ -i\sin\left(\rotationangle\right) & 0 & \cos\left(\rotationangle\right) & 0 \\ 0 & i\sin\left(\rotationangle\right) & 0 & \cos\left(\rotationangle\right) \end{pmatrix}

Note

In Qiskit’s convention, higher qubit indices are more significant (little endian convention). In the above example we apply the gate on (q_0, q_1) which results in the $X \otimes Z$ tensor order. Instead, if we apply it on (q_1, q_0), the matrix will be $Z \otimes X$ :

     ┌─────────┐
q_0: ┤1        ├
     │  Rzx(θ) │
q_1: ┤0        ├
     └─────────┘

\providecommand{\rotationangle}{\frac{\theta}{2}} R_{ZX}(\theta)\ q_1, q_0 = exp(-i \frac{\theta}{2} Z{\otimes}X) = \begin{pmatrix} \cos(\rotationangle) & -i\sin(\rotationangle) & 0 & 0 \\ -i\sin(\rotationangle) & \cos(\rotationangle) & 0 & 0 \\ 0 & 0 & \cos(\rotationangle) & i\sin(\rotationangle) \\ 0 & 0 & i\sin(\rotationangle) & \cos(\rotationangle) \end{pmatrix}

This is a direct sum of RX rotations, so this gate is equivalent to a uniformly controlled (multiplexed) RX gate:

R_{ZX}(\theta)\ q_1, q_0 = \begin{pmatrix} RX(\theta) & 0 \\ 0 & RX(-\theta) \end{pmatrix}

Examples:

$R_{ZX}(\theta = 0)\ q_0, q_1 = I$ $R_{ZX}(\theta = 2\pi)\ q_0, q_1 = -I$ $R_{ZX}(\theta = \pi)\ q_0, q_1 = -i X \otimes Z$ $R_{ZX}(\theta = \frac{\pi}{2})\ q_0, q_1 = \frac{1}{\sqrt{2}} \begin{pmatrix} 1 & 0 & -i & 0 \\ 0 & 1 & 0 & i \\ -i & 0 & 1 & 0 \\ 0 & i & 0 & 1 \end{pmatrix}$

Create new RZX gate.

Attributes

base_class

Get the base class of this instruction. This is guaranteed to be in the inheritance tree of self.

The “base class” of an instruction is the lowest class in its inheritance tree that the object should be considered entirely compatible with for _all_ circuit applications. This typically means that the subclass is defined purely to offer some sort of programmer convenience over the base class, and the base class is the “true” class for a behavioral perspective. In particular, you should not override base_class if you are defining a custom version of an instruction that will be implemented differently by hardware, such as an alternative measurement strategy, or a version of a parametrized gate with a particular set of parameters for the purposes of distinguishing it in a Target from the full parametrized gate.

This is often exactly equivalent to type(obj), except in the case of singleton instances of standard-library instructions. These singleton instances are special subclasses of their base class, and this property will return that base. For example:

>>> isinstance(XGate(), XGate)
True
>>> type(XGate()) is XGate
False
>>> XGate().base_class is XGate
True

In general, you should not rely on the precise class of an instruction; within a given circuit, it is expected that Instruction.name should be a more suitable discriminator in most situations.

condition

The classical condition on the instruction.

Deprecated since version 1.3.0

The property qiskit.circuit.instruction.Instruction.condition is deprecated as of qiskit 1.3.0. It will be removed in 2.0.0.

condition_bits

Get Clbits in condition.

Deprecated since version 1.3.0

The property qiskit.circuit.instruction.Instruction.condition_bits is deprecated as of qiskit 1.3.0. It will be removed in 2.0.0.

decompositions

Get the decompositions of the instruction from the SessionEquivalenceLibrary.

definition

Return definition in terms of other basic gates.

duration

Get the duration.

Deprecated since version 1.3.0

The property qiskit.circuit.instruction.Instruction.duration is deprecated as of qiskit 1.3.0. It will be removed in Qiskit 2.0.0.

label

Return instruction label

mutable

Is this instance is a mutable unique instance or not.

If this attribute is False the gate instance is a shared singleton and is not mutable.

name

Return the name.

num_clbits

Return the number of clbits.

num_qubits

Return the number of qubits.

params

The parameters of this Instruction. Ideally these will be gate angles.

unit

Get the time unit of duration.

Deprecated since version 1.3.0

The property qiskit.circuit.instruction.Instruction.unit is deprecated as of qiskit 1.3.0. It will be removed in Qiskit 2.0.0.

Methods

control

control(num_ctrl_qubits=1, label=None, ctrl_state=None, annotated=None)

GitHub

Return a (multi-)controlled-RZX gate.

Parameters

num_ctrl_qubits (int) – number of control qubits.
label (str | None) – An optional label for the gate [Default: None]
ctrl_state (str |int | None) – control state expressed as integer, string (e.g.``’110’), or ``None. If None, use all 1s.
annotated (bool | None) – indicates whether the controlled gate should be implemented as an annotated gate. If None, this is set to True if the gate contains free parameters, in which case it cannot yet be synthesized.

Returns

controlled version of this gate.

Return type

ControlledGate

inverse

inverse(annotated=False)

GitHub

Return inverse RZX gate (i.e. with the negative rotation angle).

Parameters

annotated (bool) –

when set to True, this is typically used to return an

AnnotatedOperation with an inverse modifier set instead of a concrete Gate. However, for this class this argument is ignored as the inverse of this gate is always a RZXGate with an inverted parameter value.

Returns:

RZXGate: inverse gate.

power

power(exponent, annotated=False)

GitHub

Raise this gate to the power of exponent.

Implemented either as a unitary gate (ref. UnitaryGate) or as an annotated operation (ref. AnnotatedOperation). In the case of several standard gates, such as RXGate, when the power of a gate can be expressed in terms of another standard gate that is returned directly.

Parameters

exponent (float) – the power to raise the gate to
annotated (bool) – indicates whether the power gate can be implemented as an annotated operation. In the case of several standard gates, such as RXGate, this argument is ignored when the power of a gate can be expressed in terms of another standard gate.

Returns

An operation implementing gate^exponent

Raises

CircuitError – If gate is not unitary

Was this page helpful?

Report a bug or request content on GitHub.