Skip to main contentIBM Quantum Documentation
This page is from the dev version of Qiskit SDK. Go to the stable version

QAOAAnsatz

class qiskit.circuit.library.QAOAAnsatz(cost_operator=None, reps=1, initial_state=None, mixer_operator=None, name='QAOA', flatten=None)

GitHub

Bases: EvolvedOperatorAnsatz

A generalized QAOA quantum circuit with a support of custom initial states and mixers.

References

[1]: Farhi et al., A Quantum Approximate Optimization Algorithm.

arXiv:1411.4028

Parameters

  • cost_operator (BaseOperator or OperatorBase, optional) – The operator representing the cost of the optimization problem, denoted as U(C,γ)U(C, \gamma) in the original paper. Must be set either in the constructor or via property setter.
  • reps (int) – The integer parameter p, which determines the depth of the circuit, as specified in the original paper, default is 1.
  • initial_state (QuantumCircuit, optional) – An optional initial state to use. If None is passed then a set of Hadamard gates is applied as an initial state to all qubits.
  • mixer_operator (BaseOperator or OperatorBase or QuantumCircuit, optional) – An optional custom mixer to use instead of the global X-rotations, denoted as U(B,β)U(B, \beta) in the original paper. Can be an operator or an optionally parameterized quantum circuit.
  • name (str) – A name of the circuit, default ‘qaoa’
  • flatten (bool | None) – Set this to True to output a flat circuit instead of nesting it inside multiple layers of gate objects. By default currently the contents of the output circuit will be wrapped in nested objects for cleaner visualization. However, if you’re using this circuit for anything besides visualization its strongly recommended to set this flag to True to avoid a large performance overhead for parameter binding.

Attributes

ancillas

A list of AncillaQubits in the order that they were added. You should not mutate this.

calibrations

Return calibration dictionary.

The custom pulse definition of a given gate is of the form {'gate_name': {(qubits, params): schedule}}

Deprecated since version 1.3

The property qiskit.circuit.quantumcircuit.QuantumCircuit.calibrations is deprecated as of Qiskit 1.3. It will be removed in Qiskit 2.0. The entire Qiskit Pulse package is being deprecated and will be moved to the Qiskit Dynamics repository: https://github.com/qiskit-community/qiskit-dynamics. Note that once removed, qiskit.circuit.quantumcircuit.QuantumCircuit.calibrations will have no alternative in Qiskit.

clbits

A list of Clbits in the order that they were added. You should not mutate this.

cost_operator

Returns an operator representing the cost of the optimization problem.

Returns

cost operator.

Return type

BaseOperator or OperatorBase

data

The circuit data (instructions and context).

Returns

a list-like object containing the CircuitInstructions for each instruction.

Return type

QuantumCircuitData

duration

The total duration of the circuit, set by a scheduling transpiler pass. Its unit is specified by unit.

Deprecated since version 1.3.0

The property qiskit.circuit.quantumcircuit.QuantumCircuit.duration is deprecated as of Qiskit 1.3.0. It will be removed in Qiskit 2.0.0.

entanglement

Get the entanglement strategy.

Returns

The entanglement strategy, see get_entangler_map() for more detail on how the format is interpreted.

entanglement_blocks

The blocks in the entanglement layers.

Returns

The blocks in the entanglement layers.

evolution

The evolution converter used to compute the evolution.

Returns

The evolution converter used to compute the evolution.

Return type

EvolutionSynthesis

flatten

Returns whether the circuit is wrapped in nested gates/instructions or flattened.

global_phase

The global phase of the current circuit scope in radians.

initial_state

Returns an optional initial state as a circuit

insert_barriers

If barriers are inserted in between the layers or not.

Returns

True, if barriers are inserted in between the layers, False if not.

instances

Default value: 157

layout

Return any associated layout information about the circuit

This attribute contains an optional TranspileLayout object. This is typically set on the output from transpile() or PassManager.run() to retain information about the permutations caused on the input circuit by transpilation.

There are two types of permutations caused by the transpile() function, an initial layout which permutes the qubits based on the selected physical qubits on the Target, and a final layout which is an output permutation caused by SwapGates inserted during routing.

metadata

Arbitrary user-defined metadata for the circuit.

Qiskit will not examine the content of this mapping, but it will pass it through the transpiler and reattach it to the output, so you can track your own metadata.

mixer_operator

Returns an optional mixer operator expressed as an operator or a quantum circuit.

Returns

mixer operator or circuit.

Return type

BaseOperator or OperatorBase or QuantumCircuit, optional

num_ancillas

Return the number of ancilla qubits.

num_captured_vars

The number of real-time classical variables in the circuit marked as captured from an enclosing scope.

This is the length of the iter_captured_vars() iterable. If this is non-zero, num_input_vars must be zero.

num_clbits

Return number of classical bits.

num_declared_vars

The number of real-time classical variables in the circuit that are declared by this circuit scope, excluding inputs or captures.

This is the length of the iter_declared_vars() iterable.

num_input_vars

The number of real-time classical variables in the circuit marked as circuit inputs.

This is the length of the iter_input_vars() iterable. If this is non-zero, num_captured_vars must be zero.

num_layers

Return the number of layers in the n-local circuit.

Returns

The number of layers in the circuit.

num_parameters

The number of parameter objects in the circuit.

num_parameters_settable

The number of total parameters that can be set to distinct values.

This does not change when the parameters are bound or exchanged for same parameters, and therefore is different from num_parameters which counts the number of unique Parameter objects currently in the circuit.

Returns

The number of parameters originally available in the circuit.

Note

This quantity does not require the circuit to be built yet.

num_qubits

num_vars

The number of real-time classical variables in the circuit.

This is the length of the iter_vars() iterable.

op_start_times

Return a list of operation start times.

This attribute is enabled once one of scheduling analysis passes runs on the quantum circuit.

Returns

List of integers representing instruction start times. The index corresponds to the index of instruction in QuantumCircuit.data.

Raises

AttributeError – When circuit is not scheduled.

operators

The operators that are evolved in this circuit.

Returns

The operators to be evolved

(and circuits) in this ansatz.

Return type

List[Union[BaseOperator, OperatorBase, QuantumCircuit]]

ordered_parameters

The parameters used in the underlying circuit.

This includes float values and duplicates.

Examples

>>> # prepare circuit ...
>>> print(nlocal)
     ┌───────┐┌──────────┐┌──────────┐┌──────────┐
q_0:Ry(1) ├┤ Ry(θ[1]) ├┤ Ry(θ[1]) ├┤ Ry(θ[3])
     └───────┘└──────────┘└──────────┘└──────────┘
>>> nlocal.parameters
{Parameter(θ[1]), Parameter(θ[3])}
>>> nlocal.ordered_parameters
[1, Parameter(θ[1]), Parameter(θ[1]), Parameter(θ[3])]

Returns

The parameters objects used in the circuit.

parameter_bounds

The parameter bounds for the unbound parameters in the circuit.

Returns

A list of pairs indicating the bounds, as (lower, upper). None indicates an unbounded parameter in the corresponding direction. If None is returned, problem is fully unbounded.

parameters

The parameters defined in the circuit.

This attribute returns the Parameter objects in the circuit sorted alphabetically. Note that parameters instantiated with a ParameterVector are still sorted numerically.

Examples

The snippet below shows that insertion order of parameters does not matter.

>>> from qiskit.circuit import QuantumCircuit, Parameter
>>> a, b, elephant = Parameter("a"), Parameter("b"), Parameter("elephant")
>>> circuit = QuantumCircuit(1)
>>> circuit.rx(b, 0)
>>> circuit.rz(elephant, 0)
>>> circuit.ry(a, 0)
>>> circuit.parameters  # sorted alphabetically!
ParameterView([Parameter(a), Parameter(b), Parameter(elephant)])

Bear in mind that alphabetical sorting might be unintuitive when it comes to numbers. The literal “10” comes before “2” in strict alphabetical sorting.

>>> from qiskit.circuit import QuantumCircuit, Parameter
>>> angles = [Parameter("angle_1"), Parameter("angle_2"), Parameter("angle_10")]
>>> circuit = QuantumCircuit(1)
>>> circuit.u(*angles, 0)
>>> circuit.draw()
   ┌─────────────────────────────┐
q:U(angle_1,angle_2,angle_10)
   └─────────────────────────────┘
>>> circuit.parameters
ParameterView([Parameter(angle_1), Parameter(angle_10), Parameter(angle_2)])

To respect numerical sorting, a ParameterVector can be used.

>>> from qiskit.circuit import QuantumCircuit, Parameter, ParameterVector
>>> x = ParameterVector("x", 12)
>>> circuit = QuantumCircuit(1)
>>> for x_i in x:
...     circuit.rx(x_i, 0)
>>> circuit.parameters
ParameterView([
    ParameterVectorElement(x[0]), ParameterVectorElement(x[1]),
    ParameterVectorElement(x[2]), ParameterVectorElement(x[3]),
    ..., ParameterVectorElement(x[11])
])

Returns

The sorted Parameter objects in the circuit.

preferred_init_points

Getter of preferred initial points based on the given initial state.

prefix

Default value: 'circuit'

qregs

Type: list[QuantumRegister]

A list of the QuantumRegisters in this circuit. You should not mutate this.

qubits

A list of Qubits in the order that they were added. You should not mutate this.

reps

Returns the reps parameter, which determines the depth of the circuit.

rotation_blocks

The blocks in the rotation layers.

Returns

The blocks in the rotation layers.

unit

The unit that duration is specified in.

Deprecated since version 1.3.0

The property qiskit.circuit.quantumcircuit.QuantumCircuit.unit is deprecated as of Qiskit 1.3.0. It will be removed in Qiskit 2.0.0.

name

Type: str

A human-readable name for the circuit.

cregs

Type: list[ClassicalRegister]

A list of the ClassicalRegisters in this circuit. You should not mutate this.

Was this page helpful?
Report a bug or request content on GitHub.