qiskit.visualization.pulse_drawer

qiskit.visualization.pulse_drawer(program, style=None, backend=None, time_range=None, time_unit='dt', disable_channels=None, show_snapshot=True, show_framechange=True, show_waveform_info=True, show_barrier=True, plotter='mpl2d', axis=None)

Generate visualization data for pulse programs.

Parameters

$program (Waveform | ParametricPulse | SymbolicPulse | Schedule | ScheduleBlock) - Program to visualize. This program can be arbitrary Qiskit Pulse program, such as Waveform, ParametricPulse, SymbolicPulse, Schedule and ScheduleBlock .$
$style (Dict [str, Any] | None) - Stylesheet options. This can be dictionary or preset stylesheet classes. See IQXStandard, IQXSimple, and IQXDebugging for details of preset stylesheets. See also the stylesheet section for details of configuration keys.$
$backend (Backend | None) - Backend object to play the input pulse program. If provided, the plotter may use to make the visualization hardware aware.$
$time_range (Tuple [int, int] | None) - Set horizontal axis limit. Tuple (tmin, tmax) .$
$time_unit (str) - The unit of specified time range either dt or ns . The unit of ns is available only when backend object is provided.$
$disable_channels (List [Channel] | None) - A control property to show specific pulse channel. Pulse channel instances provided as a list is not shown in the output image.$
$show_snapshot (bool) - Show snapshot instructions.$
$show_framechange (bool) - Show frame change instructions. The frame change represents instructions that modulate phase or frequency of pulse channels.$
$show_waveform_info (bool) - Show waveform annotations, i.e. name, of waveforms. Set True to show additional information about waveforms.$
$show_barrier (bool) - Show barrier lines.$

plotter (str) -

Name of plotter API to generate an output image. One of following APIs should be specified:

mpl2d: Matplotlib API for 2D image generation.
    Matplotlib API to generate 2D image. Charts are placed along y axis with
    vertical offset. This API takes matplotlib.axes.Axes as `axis` input.

axis and style kwargs may depend on the plotter.

$axis (Any | None) - Arbitrary object passed to the plotter. If this object is provided, the plotters use a given axis instead of internally initializing a figure object. This object format depends on the plotter. See plotter argument for details.$

Returns

Visualization output data. The returned data type depends on the plotter. If matplotlib family is specified, this will be a matplotlib.pyplot.Figure data. The returned data is generated by the get_image() method of the specified plotter API.

Style Dict Details

The stylesheet kwarg contains numerous options that define the style of the output pulse visualization. The stylesheet options can be classified into formatter, generator and layout. Those options available in the stylesheet are defined below:

Parameters

$formatter.general.fig_width - Width of output image (default 13).$
$formatter.general.fig_chart_height - Height of output image per chart. The height of each chart is multiplied with this factor and the sum of all chart heights becomes the height of output image (default 1.5).$
$formatter.general.vertical_resolution - Vertical resolution of the pulse envelope. The change of data points below this limit is ignored (default 1e-6).$
$formatter.general.max_scale - Maximum scaling factor of each chart. This factor is considered when chart auto-scaling is enabled (default 100).$

formatter.color.waveforms -

A dictionary of the waveform colors to use for each element type in the output visualization. The default values are:

{
    'W': `['#648fff', '#002999']`,
    'D': `['#648fff', '#002999']`,
    'U': `['#ffb000', '#994A00']`,
    'M': `['#dc267f', '#760019']`,
    'A': `['#dc267f', '#760019']`
}

$formatter.color.baseline - Color code of lines of zero line of each chart (default ‘#000000’).$
$formatter.color.barrier - Color code of lines of barrier (default ‘#222222’).$
$formatter.color.background - Color code of the face color of canvas (default ‘#f2f3f4’).$
$formatter.color.fig_title - Color code of the figure title text (default ‘#000000’).$
$formatter.color.annotate - Color code of annotation texts in the canvas (default ‘#222222’).$
$formatter.color.frame_change - Color code of the symbol for frame changes (default ‘#000000’).$
$formatter.color.snapshot - Color code of the symbol for snapshot (default ‘#000000’)$
$formatter.color.opaque_shape - Color code of the face and edge of opaque shape box (default [‘#fffacd’, ‘#000000’])$
$formatter.color.axis_label - Color code of axis labels (default ‘#000000’).$
$formatter.alpha.fill_waveform - Transparency of waveforms. A value in the range from 0 to 1. The value 0 gives completely transparent waveforms (default 0.3).$
$formatter.alpha.baseline - Transparency of base lines. A value in the range from 0 to 1. The value 0 gives completely transparent base lines (default 1.0).$
$formatter.alpha.barrier - Transparency of barrier lines. A value in the range from 0 to 1. The value 0 gives completely transparent barrier lines (default 0.7).$
$formatter.alpha.opaque_shape - Transparency of opaque shape box. A value in the range from 0 to 1. The value 0 gives completely transparent barrier lines (default 0.7).$
$formatter.layer.fill_waveform - Layer index of waveforms. Larger number comes in the front of the output image (default 2).$
$formatter.layer.baseline - Layer index of baselines. Larger number comes in the front of the output image (default 1).$
$formatter.layer.barrier - Layer index of barrier lines. Larger number comes in the front of the output image (default 1).$
$formatter.layer.annotate - Layer index of annotations. Larger number comes in the front of the output image (default 5).$
$formatter.layer.axis_label - Layer index of axis labels. Larger number comes in the front of the output image (default 5).$
$formatter.layer.frame_change - Layer index of frame change symbols. Larger number comes in the front of the output image (default 4).$
$formatter.layer.snapshot - Layer index of snapshot symbols. Larger number comes in the front of the output image (default 3).$
$formatter.layer.fig_title - Layer index of the figure title. Larger number comes in the front of the output image (default 6).$
$formatter.margin.top - Margin from the top boundary of the figure canvas to the surface of the first chart (default 0.5).$
$formatter.margin.bottom - Margin from the bottom boundary of the figure canvas to the surface of the last chart (default 0.5).$
$formatter.margin.left_percent - Margin from the left boundary of the figure canvas to the zero point of the horizontal axis. The value is in units of percentage of the whole program duration. If the duration is 100 and the value of 0.5 is set, this keeps left margin of 5 (default 0.05).$
$formatter.margin.right_percent - Margin from the right boundary of the figure canvas to the left limit of the horizontal axis. The value is in units of percentage of the whole program duration. If the duration is 100 and the value of 0.5 is set, this keeps right margin of 5 (default 0.05).$
$formatter.margin.between_channel - Vertical margin between charts (default 0.2).$
$formatter.label_offset.pulse_name - Offset of pulse name annotations from the chart baseline (default 0.3).$
$formatter.label_offset.chart_info - Offset of chart info annotations from the chart baseline (default 0.3).$
$formatter.label_offset.frame_change - Offset of frame change annotations from the chart baseline (default 0.3).$
$formatter.label_offset.snapshot - Offset of snapshot annotations from the chart baseline (default 0.3).$
$formatter.text_size.axis_label - Text size of axis labels (default 15).$
$formatter.text_size.annotate - Text size of annotations (default 12).$
$formatter.text_size.frame_change - Text size of frame change symbols (default 20).$
$formatter.text_size.snapshot - Text size of snapshot symbols (default 20).$
$formatter.text_size.fig_title - Text size of the figure title (default 15).$
$formatter.text_size.axis_break_symbol - Text size of axis break symbols (default 15).$
$formatter.line_width.fill_waveform - Line width of the fringe of filled waveforms (default 0).$
$formatter.line_width.axis_break - Line width of axis breaks. The axis break line paints over other drawings with the background face color (default 6).$
$formatter.line_width.baseline - Line width of base lines (default 1)$
$formatter.line_width.barrier - Line width of barrier lines (default 1).$
$formatter.line_width.opaque_shape - Line width of opaque shape box (default 1).$
$formatter.line_style.fill_waveform - Line style of the fringe of filled waveforms. This conforms to the line style spec of matplotlib (default ‘-’).$
$formatter.line_style.baseline - Line style of base lines. This conforms to the line style spec of matplotlib (default ‘-’).$
$formatter.line_style.barrier - Line style of barrier lines. This conforms to the line style spec of matplotlib (default ‘:’).$
$formatter.line_style.opaque_shape - Line style of opaque shape box. This conforms to the line style spec of matplotlib (default ‘-’).$
$formatter.channel_scaling.drive - Default scaling value of drive channel waveforms (default 1.0).$
$formatter.channel_scaling.control - Default scaling value of control channel waveforms (default 1.0).$
$formatter.channel_scaling.measure - Default scaling value of measure channel waveforms (default 1.0).$
$formatter.channel_scaling.acquire - Default scaling value of acquire channel waveforms (default 1.0).$
$formatter.channel_scaling.pos_spacing - Minimum height of chart above the baseline. Chart top is determined based on the maximum height of waveforms associated with the chart. If the maximum height is below this value, this value is set as the chart top (default 0.1).$
$formatter.channel_scaling.neg_spacing - Minimum height of chart below the baseline. Chart bottom is determined based on the minimum height of waveforms associated with the chart. If the minimum height is above this value, this value is set as the chart bottom (default -0.1).$
$formatter.box_width.opaque_shape - Default box length of the waveform representation when the instruction is parameterized and duration is not bound or not defined. Value is units in dt (default: 150).$
$formatter.box_height.opaque_shape - Default box height of the waveform representation when the instruction is parameterized (default: 0.4).$
$formatter.axis_break.length - Waveform or idle time duration that axis break is applied. Intervals longer than this value are truncated. The value is in units of data points (default 3000).$
$formatter.axis_break.max_length - Length of new waveform or idle time duration after axis break is applied. Longer intervals are truncated to this length (default 1000).$
$formatter.control.fill_waveform - Set True to fill waveforms with face color (default True). When you disable this option, you should set finite line width to formatter.line_width.fill_waveform, otherwise nothing will appear in the graph.$
$formatter.control.apply_phase_modulation - Set True to apply phase modulation to the waveforms (default True).$
$formatter.control.show_snapshot_channel - Set True to show snapshot instructions (default True).$
$formatter.control.show_acquire_channel - Set True to show acquire channels (default True).$
$formatter.control.show_empty_channel - Set True to show charts without any waveforms (default True).$
$formatter.control.auto_chart_scaling - Set True to apply auto-scaling to charts (default True).$
$formatter.control.axis_break - Set True to apply axis break for long intervals (default True).$
$formatter.unicode_symbol.frame_change - Text that represents the symbol of frame change. This text is used when the plotter doesn’t support latex (default u’↺’).$
$formatter.unicode_symbol.snapshot - Text that represents the symbol of snapshot. This text is used when the plotter doesn’t support latex (default u’↯’).$
$formatter.unicode_symbol.phase_parameter - Text that represents the symbol of parameterized phase value. This text is used when the plotter doesn’t support latex (default u’θ’).$
$formatter.unicode_symbol.freq_parameter - Text that represents the symbol of parameterized frequency value. This text is used when the plotter doesn’t support latex (default ‘f’).$
$formatter.latex_symbol.frame_change - Latex text that represents the symbol of frame change (default r’circlearrowleft’).$
$formatter.latex_symbol.snapshot - Latex text that represents the symbol of snapshot (default ‘’).$
$formatter.latex_symbol.phase_parameter - Latex text that represents the symbol of parameterized phase value (default r’ heta’).$
$formatter.latex_symbol.freq_parameter - Latex text that represents the symbol of parameterized frequency value (default ‘f’).$
$generator.waveform - List of callback functions that generates drawing for waveforms. Arbitrary callback functions satisfying the generator format can be set here. There are some default generators in the pulse drawer. See waveform for more details. No default generator is set.$
$generator.frame - List of callback functions that generates drawing for frame changes. Arbitrary callback functions satisfying the generator format can be set here. There are some default generators in the pulse drawer. See frame for more details. No default generator is set.$
$generator.chart - List of callback functions that generates drawing for charts. Arbitrary callback functions satisfying the generator format can be set here. There are some default generators in the pulse drawer. See chart for more details. No default generator is set.$
$generator.snapshot - List of callback functions that generates drawing for snapshots. Arbitrary callback functions satisfying the generator format can be set here. There are some default generators in the pulse drawer. See snapshot for more details. No default generator is set.$
$generator.barrier - List of callback functions that generates drawing for barriers. Arbitrary callback functions satisfying the generator format can be set here. There are some default generators in the pulse drawer. See barrier for more details. No default generator is set.$
$layout.chart_channel_map - Callback function that determines the relationship between pulse channels and charts. See layout for more details. No default layout is set.$
$layout.time_axis_map - Callback function that determines the layout of horizontal axis labels. See layout for more details. No default layout is set.$
$layout.figure_title - Callback function that generates a string for the figure title. See layout for more details. No default layout is set.$

Examples

To visualize a pulse program, you can call this function with set of control arguments. Most of appearance of the output image can be controlled by the stylesheet.

Drawing with the default stylesheet.

from qiskit import QuantumCircuit, transpile, schedule
from qiskit.visualization.pulse_v2 import draw
from qiskit.providers.fake_provider import FakeBoeblingen
 
qc = QuantumCircuit(2)
qc.h(0)
qc.cx(0, 1)
qc.measure_all()
qc = transpile(qc, FakeBoeblingen(), layout_method='trivial')
sched = schedule(qc, FakeBoeblingen())
 
draw(sched, backend=FakeBoeblingen())

../_images/qiskit-visualization-pulse_drawer-1.png

Drawing with the stylesheet suited for publication.

from qiskit import QuantumCircuit, transpile, schedule
from qiskit.visualization.pulse_v2 import draw, IQXSimple
from qiskit.providers.fake_provider import FakeBoeblingen
 
qc = QuantumCircuit(2)
qc.h(0)
qc.cx(0, 1)
qc.measure_all()
qc = transpile(qc, FakeBoeblingen(), layout_method='trivial')
sched = schedule(qc, FakeBoeblingen())
 
draw(sched, style=IQXSimple(), backend=FakeBoeblingen())

../_images/qiskit-visualization-pulse_drawer-2.png

Drawing with the stylesheet suited for program debugging.

from qiskit import QuantumCircuit, transpile, schedule
from qiskit.visualization.pulse_v2 import draw, IQXDebugging
from qiskit.providers.fake_provider import FakeBoeblingen
 
qc = QuantumCircuit(2)
qc.h(0)
qc.cx(0, 1)
qc.measure_all()
qc = transpile(qc, FakeBoeblingen(), layout_method='trivial')
sched = schedule(qc, FakeBoeblingen())
 
draw(sched, style=IQXDebugging(), backend=FakeBoeblingen())

../_images/qiskit-visualization-pulse_drawer-3.png

You can partially customize a preset stylesheet when initializing it.

my_style = {
    'formatter.channel_scaling.drive': 5,
    'formatter.channel_scaling.control': 1,
    'formatter.channel_scaling.measure': 5
}
style = IQXStandard(**my_style)
# draw
draw(sched, style=style, backend=FakeBoeblingen())

In the same way as above, you can create custom generator or layout functions and update the existing stylesheet with custom functions. This feature enables you to customize most of the appearance of the output image without modifying the codebase.

Raises

MissingOptionalLibraryError – When required visualization package is not installed.
VisualizationError – When invalid plotter API or invalid time range is specified.

Was this page helpful?

Report a bug or request content on GitHub.